[bluez/bluez] bb5d72: avdtp: wait for L2CAP Disconnect Rsp before CLOSIN...

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



  Branch: refs/heads/1002167
  Home:   https://github.com/bluez/bluez
  Commit: bb5d72ab477d84f36fb70954d71b17d5f0fadbb6
      https://github.com/bluez/bluez/commit/bb5d72ab477d84f36fb70954d71b17d5f0fadbb6
  Author: Pauli Virtanen <pav@xxxxxx>
  Date:   2025-09-14 (Sun, 14 Sep 2025)

  Changed paths:
    M profiles/audio/avdtp.c

  Log Message:
  -----------
  avdtp: wait for L2CAP Disconnect Rsp before CLOSING->IDLE

Delay CLOSING->IDLE until remote acknowledges L2CAP channel closure.

It is not explicitly stated in AVDTP v1.3 Sec. 6.13, but some devices
refuse commands sent immediately after L2CAP Disconnect Req, so wait
until Rsp.

Fails:

> ACL Data RX: Handle 6 flags 0x02 dlen 6
      Channel: 64 len 2 [PSM 25 mode Basic (0x00)] {chan 0}
      AVDTP: Close (0x08) Response Accept (0x02) type 0x00 label 0 nosp 0
< ACL Data TX: Handle 6 flags 0x00 dlen 12
      L2CAP: Disconnection Request (0x06) ident 16 len 4
        Destination CID: 65
        Source CID: 65
< ACL Data TX: Handle 6 flags 0x00 dlen 22
      Channel: 64 len 18 [PSM 25 mode Basic (0x00)] {chan 0}
      AVDTP: Set Configuration (0x03) Command (0x00) type 0x00 label 1 nosp 0
        ACP SEID: 7
        INT SEID: 1
        Service Category: Media Transport (0x01)
        Service Category: Media Codec (0x07)
          Media Type: Audio (0x00)
          Media Codec: MPEG-2,4 AAC (0x02)
            Object Type: MPEG-4 AAC LC (0x40)
            Frequency: 44100 (0x100)
            Channels: 2 (0x04)
            Bitrate: 220000bps
            VBR: No
        Service Category: Delay Reporting (0x08)
> ACL Data RX: Handle 6 flags 0x02 dlen 12
      L2CAP: Disconnection Response (0x07) ident 16 len 4
        Destination CID: 65
        Source CID: 65
> ACL Data RX: Handle 6 flags 0x02 dlen 8
      Channel: 64 len 4 [PSM 25 mode Basic (0x00)] {chan 0}
      AVDTP: Set Configuration (0x03) Response Reject (0x03) type 0x00 label 1 nosp 0
        Service Category: Reserved (0x29)
        Error code: UNSUPPORTED_CONFIGURATION (0x29)

Works:

> ACL Data RX: Handle 4 flags 0x02 dlen 6
      Channel: 64 len 2 [PSM 25 mode Basic (0x00)] {chan 0}
      AVDTP: Close (0x08) Response Accept (0x02) type 0x00 label 12 nosp 0
< ACL Data TX: Handle 4 flags 0x00 dlen 12
      L2CAP: Disconnection Request (0x06) ident 16 len 4
        Destination CID: 65
        Source CID: 65
> ACL Data RX: Handle 4 flags 0x02 dlen 12
      L2CAP: Disconnection Response (0x07) ident 16 len 4
        Destination CID: 65
        Source CID: 65
< ACL Data TX: Handle 4 flags 0x00 dlen 22
      Channel: 64 len 18 [PSM 25 mode Basic (0x00)] {chan 0}
      AVDTP: Set Configuration (0x03) Command (0x00) type 0x00 label 13 nosp 0
        ACP SEID: 9
        INT SEID: 2
        Service Category: Media Transport (0x01)
        Service Category: Media Codec (0x07)
          Media Type: Audio (0x00)
          Media Codec: MPEG-2,4 AAC (0x02)
            Object Type: MPEG-4 AAC LC (0x40)
            Frequency: 44100 (0x100)
            Channels: 2 (0x04)
            Bitrate: 220000bps
            VBR: No
        Service Category: Delay Reporting (0x08)
> ACL Data RX: Handle 4 flags 0x02 dlen 6
      Channel: 64 len 2 [PSM 25 mode Basic (0x00)] {chan 0}
      AVDTP: Set Configuration (0x03) Response Accept (0x02) type 0x00 label 13 nosp 0

Fixes: https://github.com/bluez/bluez/issues/1471
Fixes: aa118e965b ("a2dp: Don't wait to reconfigure")



To unsubscribe from these emails, change your notification settings at https://github.com/bluez/bluez/settings/notifications




[Index of Archives]     [Bluez Devel]     [Linux Wireless Networking]     [Linux Wireless Personal Area Networking]     [Linux ATH6KL]     [Linux USB Devel]     [Linux Media Drivers]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Big List of Linux Books]

  Powered by Linux