Hello:
This patch was applied to bluetooth/bluez.git (master)
by Luiz Augusto von Dentz <luiz.von.dentz@xxxxxxxxx>:
On Fri, 8 Aug 2025 15:10:53 -0400 you wrote:
> From: Luiz Augusto von Dentz <luiz.von.dentz@xxxxxxxxx>
>
> This adds ISO Reconnect Send and Receive #16 which test reconnecting,
> send/receive datas, 16 times to stress test the handling of reconnecting
> logic and confirm tha POLLOUT is generated everytime:
>
> ISO Reconnect Send and Receive #16 - Success - run
> Connecting to 00:AA:01:01:00:00...
> Connect 0 in progress
> Accept client connection with handle 0x0101: 0x00
> New client connection with handle 0x0101
> Successfully connected
> POLLOUT event received
> Writing 40 bytes of data
> Receive 40 bytes of data
> Client received 40 bytes of data
> Disconnecting...
> ISO handle 0x0101 disconnected
> Successfully disconnected
> Reconnecting #16...
> Connecting to 00:AA:01:01:00:00...
> Connect 0 in progress
> Accept client connection with handle 0x0101: 0x00
> New client connection with handle 0x0101
> Successfully connected
> POLLOUT event received
> Writing 40 bytes of data
> Receive 40 bytes of data
> Client received 40 bytes of data
> Disconnecting...
> ISO handle 0x0101 disconnected
> Successfully disconnected
> Reconnecting #15...
> Connecting to 00:AA:01:01:00:00...
> Connect 0 in progress
> Accept client connection with handle 0x0101: 0x00
> New client connection with handle 0x0101
> Successfully connected
> POLLOUT event received
> Writing 40 bytes of data
> Receive 40 bytes of data
> Client received 40 bytes of data
> Disconnecting...
> ISO handle 0x0101 disconnected
> Successfully disconnected
> Reconnecting #14...
> Connecting to 00:AA:01:01:00:00...
> Connect 0 in progress
> Accept client connection with handle 0x0101: 0x00
> New client connection with handle 0x0101
> Successfully connected
> POLLOUT event received
> Writing 40 bytes of data
> Receive 40 bytes of data
> Client received 40 bytes of data
> Disconnecting...
> ISO handle 0x0101 disconnected
> Successfully disconnected
> Reconnecting #13...
> Connecting to 00:AA:01:01:00:00...
> Connect 0 in progress
> Accept client connection with handle 0x0101: 0x00
> New client connection with handle 0x0101
> Successfully connected
> POLLOUT event received
> Writing 40 bytes of data
> Receive 40 bytes of data
> Client received 40 bytes of data
> Disconnecting...
> ISO handle 0x0101 disconnected
> Successfully disconnected
> Reconnecting #12...
> Connecting to 00:AA:01:01:00:00...
> Connect 0 in progress
> Accept client connection with handle 0x0101: 0x00
> New client connection with handle 0x0101
> Successfully connected
> POLLOUT event received
> Writing 40 bytes of data
> Receive 40 bytes of data
> Client received 40 bytes of data
> Disconnecting...
> ISO handle 0x0101 disconnected
> Successfully disconnected
> Reconnecting #11...
> Connecting to 00:AA:01:01:00:00...
> Connect 0 in progress
> Accept client connection with handle 0x0101: 0x00
> New client connection with handle 0x0101
> Successfully connected
> POLLOUT event received
> Writing 40 bytes of data
> Receive 40 bytes of data
> Client received 40 bytes of data
> Disconnecting...
> ISO handle 0x0101 disconnected
> Successfully disconnected
> Reconnecting #10...
> Connecting to 00:AA:01:01:00:00...
> Connect 0 in progress
> Accept client connection with handle 0x0101: 0x00
> New client connection with handle 0x0101
> Successfully connected
> POLLOUT event received
> Writing 40 bytes of data
> Receive 40 bytes of data
> Client received 40 bytes of data
> Disconnecting...
> ISO handle 0x0101 disconnected
> Successfully disconnected
> Reconnecting #9...
> Connecting to 00:AA:01:01:00:00...
> Connect 0 in progress
> Accept client connection with handle 0x0101: 0x00
> New client connection with handle 0x0101
> Successfully connected
> POLLOUT event received
> Writing 40 bytes of data
> Receive 40 bytes of data
> Client received 40 bytes of data
> Disconnecting...
> ISO handle 0x0101 disconnected
> Successfully disconnected
> Reconnecting #8...
> Connecting to 00:AA:01:01:00:00...
> Connect 0 in progress
> Accept client connection with handle 0x0101: 0x00
> New client connection with handle 0x0101
> Successfully connected
> POLLOUT event received
> Writing 40 bytes of data
> Receive 40 bytes of data
> Client received 40 bytes of data
> Disconnecting...
> ISO handle 0x0101 disconnected
> Successfully disconnected
> Reconnecting #7...
> Connecting to 00:AA:01:01:00:00...
> Connect 0 in progress
> Accept client connection with handle 0x0101: 0x00
> New client connection with handle 0x0101
> Successfully connected
> POLLOUT event received
> Writing 40 bytes of data
> Receive 40 bytes of data
> Client received 40 bytes of data
> Disconnecting...
> ISO handle 0x0101 disconnected
> Successfully disconnected
> Reconnecting #6...
> Connecting to 00:AA:01:01:00:00...
> Connect 0 in progress
> Accept client connection with handle 0x0101: 0x00
> New client connection with handle 0x0101
> Successfully connected
> POLLOUT event received
> Writing 40 bytes of data
> Receive 40 bytes of data
> Client received 40 bytes of data
> Disconnecting...
> ISO handle 0x0101 disconnected
> Successfully disconnected
> Reconnecting #5...
> Connecting to 00:AA:01:01:00:00...
> Connect 0 in progress
> Accept client connection with handle 0x0101: 0x00
> New client connection with handle 0x0101
> Successfully connected
> POLLOUT event received
> Writing 40 bytes of data
> Receive 40 bytes of data
> Client received 40 bytes of data
> Disconnecting...
> ISO handle 0x0101 disconnected
> Successfully disconnected
> Reconnecting #4...
> Connecting to 00:AA:01:01:00:00...
> Connect 0 in progress
> Accept client connection with handle 0x0101: 0x00
> New client connection with handle 0x0101
> Successfully connected
> POLLOUT event received
> Writing 40 bytes of data
> Receive 40 bytes of data
> Client received 40 bytes of data
> Disconnecting...
> ISO handle 0x0101 disconnected
> Successfully disconnected
> Reconnecting #3...
> Connecting to 00:AA:01:01:00:00...
> Connect 0 in progress
> Accept client connection with handle 0x0101: 0x00
> New client connection with handle 0x0101
> Successfully connected
> POLLOUT event received
> Writing 40 bytes of data
> Receive 40 bytes of data
> Client received 40 bytes of data
> Disconnecting...
> ISO handle 0x0101 disconnected
> Successfully disconnected
> Reconnecting #2...
> Connecting to 00:AA:01:01:00:00...
> Connect 0 in progress
> Accept client connection with handle 0x0101: 0x00
> New client connection with handle 0x0101
> Successfully connected
> POLLOUT event received
> Writing 40 bytes of data
> Receive 40 bytes of data
> Client received 40 bytes of data
> Disconnecting...
> ISO handle 0x0101 disconnected
> Successfully disconnected
> Reconnecting #1...
> Connecting to 00:AA:01:01:00:00...
> Connect 0 in progress
> Accept client connection with handle 0x0101: 0x00
> New client connection with handle 0x0101
> Successfully connected
> POLLOUT event received
> Writing 40 bytes of data
> Receive 40 bytes of data
> Client received 40 bytes of data
> Disconnecting...
> ISO handle 0x0101 disconnected
> Successfully disconnected
> ISO Reconnect Send and Receive #16 - Success - test passed
>
> [...]
Here is the summary with links:
- [BlueZ,v1] iso-tester: Add ISO Reconnect Send and Receive #16
https://git.kernel.org/pub/scm/bluetooth/bluez.git/?id=10977abda3f8
You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html
