Found using codespell.
---
profiles/audio/a2dp.c | 2 +-
profiles/audio/avrcp.c | 4 ++--
profiles/audio/bap.c | 2 +-
profiles/audio/bass.c | 2 +-
profiles/audio/micp.c | 6 +++---
profiles/battery/battery.c | 2 +-
profiles/gap/gas.c | 2 +-
profiles/health/mcap.c | 18 +++++++++---------
profiles/input/hog-lib.c | 2 +-
profiles/midi/libmidi.c | 2 +-
profiles/midi/midi.c | 2 +-
11 files changed, 22 insertions(+), 22 deletions(-)
diff --git a/profiles/audio/a2dp.c b/profiles/audio/a2dp.c
index 7c0f9c54a9e8..fe58b8fb351d 100644
--- a/profiles/audio/a2dp.c
+++ b/profiles/audio/a2dp.c
@@ -334,7 +334,7 @@ static int error_to_errno(struct avdtp_error *err)
return -perr;
default:
/*
- * An unexpect error has occurred setup may be attempted again.
+ * An unexpected error has occurred setup may be attempted again.
*/
return -EAGAIN;
}
diff --git a/profiles/audio/avrcp.c b/profiles/audio/avrcp.c
index 831f1dc8bf12..df28bf0b398c 100644
--- a/profiles/audio/avrcp.c
+++ b/profiles/audio/avrcp.c
@@ -1324,7 +1324,7 @@ static uint8_t avrcp_handle_get_current_player_value(struct avrcp *session,
len = 0;
/*
- * From sec. 5.7 of AVRCP 1.3 spec, we should igore non-existent IDs
+ * From sec. 5.7 of AVRCP 1.3 spec, we should ignore non-existent IDs
* and send a response with the existent ones. Only if all IDs are
* non-existent we should send an error.
*/
@@ -1376,7 +1376,7 @@ static uint8_t avrcp_handle_set_player_value(struct avrcp *session,
goto err;
/*
- * From sec. 5.7 of AVRCP 1.3 spec, we should igore non-existent IDs
+ * From sec. 5.7 of AVRCP 1.3 spec, we should ignore non-existent IDs
* and set the existent ones. Sec. 5.2.4 is not clear however how to
* indicate that a certain ID was not accepted. If at least one
* attribute is valid, we respond with no parameters. Otherwise an
diff --git a/profiles/audio/bap.c b/profiles/audio/bap.c
index 66403fcb7997..a1ca26bdc848 100644
--- a/profiles/audio/bap.c
+++ b/profiles/audio/bap.c
@@ -2953,7 +2953,7 @@ static uint8_t get_streams_nb_by_state(struct bap_setup *setup)
entry; entry = entry->next) {
ent_setup = entry->data;
- /* Skip the curent stream form testing */
+ /* Skip the current stream form testing */
if (ent_setup == setup) {
stream_cnt++;
continue;
diff --git a/profiles/audio/bass.c b/profiles/audio/bass.c
index 2cda00b690ca..c853fbc4ae89 100644
--- a/profiles/audio/bass.c
+++ b/profiles/audio/bass.c
@@ -546,7 +546,7 @@ static void bis_handler(uint8_t sid, uint8_t bis, uint8_t sgrp,
queue_push_tail(setup->dg->setups, setup);
- /* Only handle streams required by the Brodcast Assistant. */
+ /* Only handle streams required by the Broadcast Assistant. */
if (!bt_bass_check_bis(dg->src, bis))
return;
diff --git a/profiles/audio/micp.c b/profiles/audio/micp.c
index 3f0845dcb328..4f0bde1438ce 100644
--- a/profiles/audio/micp.c
+++ b/profiles/audio/micp.c
@@ -87,7 +87,7 @@ static void micp_data_add(struct micp_data *data)
DBG("data %p", data);
if (queue_find(sessions, NULL, data)) {
- error("data %p allready added", data);
+ error("data %p already added", data);
return;
}
@@ -145,7 +145,7 @@ static void micp_detached(struct bt_micp *micp, void *user_data)
data = queue_find(sessions, match_data, micp);
if (!data) {
- error("unable to find sessio");
+ error("unable to find session");
return;
}
@@ -197,7 +197,7 @@ static int micp_probe(struct btd_service *service)
ba2str(device_get_address(device), addr);
DBG("%s", addr);
- /*Ignore, if we probed for this device allready */
+ /*Ignore, if we probed for this device already */
if (data) {
error("Profile probed twice for this device");
return -EINVAL;
diff --git a/profiles/battery/battery.c b/profiles/battery/battery.c
index 5318d40d12b4..5be78ab14c7b 100644
--- a/profiles/battery/battery.c
+++ b/profiles/battery/battery.c
@@ -151,7 +151,7 @@ static void read_initial_battery_level_cb(bool success,
struct batt *batt = user_data;
if (!success) {
- DBG("Reading battery level failed with ATT errror: %u",
+ DBG("Reading battery level failed with ATT error: %u",
att_ecode);
return;
}
diff --git a/profiles/gap/gas.c b/profiles/gap/gas.c
index 08aaf19cb332..a4831d38f43b 100644
--- a/profiles/gap/gas.c
+++ b/profiles/gap/gas.c
@@ -99,7 +99,7 @@ static void read_device_name_cb(bool success, uint8_t att_ecode,
char *name;
if (!success) {
- DBG("Reading device name failed with ATT errror: %u",
+ DBG("Reading device name failed with ATT error: %u",
att_ecode);
return;
}
diff --git a/profiles/health/mcap.c b/profiles/health/mcap.c
index 2e4214a6984f..74fffa71a2d1 100644
--- a/profiles/health/mcap.c
+++ b/profiles/health/mcap.c
@@ -2416,7 +2416,7 @@ static gboolean read_btclock(struct mcap_mcl *mcl, uint32_t *btclock,
/*
* FIXME: btd_adapter_read_clock(...) always return FALSE, current
* code doesn't support CSP (Clock Synchronization Protocol). To avoid
- * build dependancy on struct 'btd_adapter', removing this code.
+ * build dependency on struct 'btd_adapter', removing this code.
*/
return FALSE;
@@ -2506,7 +2506,7 @@ static gboolean initialize_caps(struct mcap_mcl *mcl)
_caps.ts_acc = 20; /* ppm, estimated */
- /* A little exercise before measuing latency */
+ /* A little exercise before measuring latency */
clock_gettime(CLK, &t1);
read_btclock_retry(mcl, &btclock, &btaccuracy);
@@ -2878,7 +2878,7 @@ static void proc_sync_set_req(struct mcap_mcl *mcl, uint8_t *cmd, uint32_t len)
return;
}
- /* Convert to miliseconds */
+ /* Convert to milliseconds */
phase2_delay = bt2ms(phase2_delay);
if (phase2_delay > 61*1000) {
@@ -2961,12 +2961,12 @@ static void proc_sync_cap_rsp(struct mcap_mcl *mcl, uint8_t *cmd, uint32_t len)
gpointer user_data;
if (mcl->csp->csp_req != MCAP_MD_SYNC_CAP_REQ) {
- DBG("CSP: got unexpected cap respose");
+ DBG("CSP: got unexpected cap response");
return;
}
if (!mcl->csp->csp_priv_data) {
- DBG("CSP: no priv data for cap respose");
+ DBG("CSP: no priv data for cap response");
return;
}
@@ -2979,7 +2979,7 @@ static void proc_sync_cap_rsp(struct mcap_mcl *mcl, uint8_t *cmd, uint32_t len)
mcl->csp->csp_req = 0;
if (len != sizeof(mcap_md_sync_cap_rsp)) {
- DBG("CSP: got corrupted cap respose");
+ DBG("CSP: got corrupted cap response");
return;
}
@@ -3009,12 +3009,12 @@ static void proc_sync_set_rsp(struct mcap_mcl *mcl, uint8_t *cmd, uint32_t len)
gpointer user_data;
if (mcl->csp->csp_req != MCAP_MD_SYNC_SET_REQ) {
- DBG("CSP: got unexpected set respose");
+ DBG("CSP: got unexpected set response");
return;
}
if (!mcl->csp->csp_priv_data) {
- DBG("CSP: no priv data for set respose");
+ DBG("CSP: no priv data for set response");
return;
}
@@ -3027,7 +3027,7 @@ static void proc_sync_set_rsp(struct mcap_mcl *mcl, uint8_t *cmd, uint32_t len)
mcl->csp->csp_req = 0;
if (len != sizeof(mcap_md_sync_set_rsp)) {
- DBG("CSP: got corrupted set respose");
+ DBG("CSP: got corrupted set response");
return;
}
diff --git a/profiles/input/hog-lib.c b/profiles/input/hog-lib.c
index 22599f71a394..dbf4dad96bc5 100644
--- a/profiles/input/hog-lib.c
+++ b/profiles/input/hog-lib.c
@@ -1132,7 +1132,7 @@ static void proto_mode_read_cb(guint8 status, const guint8 *pdu, guint16 plen,
if (value == HOG_PROTO_MODE_BOOT) {
uint8_t nval = HOG_PROTO_MODE_REPORT;
- DBG("HoG is operating in Boot Procotol Mode");
+ DBG("HoG is operating in Boot Protocol Mode");
gatt_write_cmd(hog->attrib, hog->proto_mode_handle, &nval,
sizeof(nval), NULL, NULL);
diff --git a/profiles/midi/libmidi.c b/profiles/midi/libmidi.c
index 5b77cd3f52f1..6f2914a8c2ef 100644
--- a/profiles/midi/libmidi.c
+++ b/profiles/midi/libmidi.c
@@ -423,7 +423,7 @@ size_t midi_read_raw(struct midi_read_parser *parser, const uint8_t *data,
snd_seq_ev_set_sysex(ev, parser->sysex_stream.len,
parser->sysex_stream.data);
- midi_size = 1; /* timestampLow was alredy processed */
+ midi_size = 1; /* timestampLow was already processed */
goto _finish;
case 0x80 ... 0xEF:
diff --git a/profiles/midi/midi.c b/profiles/midi/midi.c
index bab309bca7c3..0976842e80b2 100644
--- a/profiles/midi/midi.c
+++ b/profiles/midi/midi.c
@@ -319,7 +319,7 @@ static int midi_accept(struct btd_service *service)
err = snd_seq_client_id(midi->seq_handle);
if (err < 0) {
- error("Could retreive ALSA client: %s (%d)", snd_strerror(err), err);
+ error("Could retrieve ALSA client: %s (%d)", snd_strerror(err), err);
goto _err_handle;
}
midi->seq_client_id = err;
--
2.50.0
