I cannot find a specific interval for sending unprovisioned device beacons in MshPRT_v1.1, section 3.10.2/5.2.1. The current interval of 500 ms seems to cause interferience with normal advertising messages, maybe this is controller dependent (seen on RTL8761BU). A beacon interval of 1000 ms should be sufficient for scanning (e.g. by a provisioner) while allowing normal advertising messages to be transmitted. --- mesh/prov-acceptor.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/mesh/prov-acceptor.c b/mesh/prov-acceptor.c index 27d4964316b3..78304515ed16 100644 --- a/mesh/prov-acceptor.c +++ b/mesh/prov-acceptor.c @@ -793,7 +793,7 @@ bool acceptor_start(uint8_t num_ele, uint8_t *uuid, memcpy(beacon + 2, uuid, 16); /* Infinitely Beacon until Canceled, or Provisioning Starts */ - result = mesh_send_pkt(0, 500, beacon, len); + result = mesh_send_pkt(0, 1000, beacon, len); if (!result) goto error_fail; -- 2.43.0
