Hi Luiz,
after changing my test setup (I now only use Mesh, no "normal" advertising
anymore), I get many of these errors:
bluetooth-meshd[276]: @ MGMT Command: Mesh Send (0x0059) plen 40 {0x0001} [hci0] 43.846388
Address: 00:00:00:00:00:00 (OUI 00-00-00)
Addr Type: 2
Instant: 0x0000000000000000
Delay: 0
Count: 1
Data Length: 21
Data[21]: 142b003a8b6fe779bd4385a94fed0a9cf611880000
< HCI Command: LE Set Extended Advertising Parameters (0x08|0x0036) plen 25 #479 [hci0] 43.846505
Handle: 0x05
Properties: 0x0010
Use legacy advertising PDUs: ADV_NONCONN_IND
Min advertising interval: 1280.000 msec (0x0800)
Max advertising interval: 1280.000 msec (0x0800)
Channel map: 37, 38, 39 (0x07)
Own address type: Random (0x01)
Peer address type: Public (0x00)
Peer address: 00:00:00:00:00:00 (OUI 00-00-00)
Filter policy: Allow Scan Request from Any, Allow Connect Request from Any (0x00)
TX power: Host has no preference (0x7f)
Primary PHY: LE 1M (0x01)
Secondary max skip: 0x00
Secondary PHY: LE 1M (0x01)
SID: 0x00
Scan request notifications: Disabled (0x00)
> HCI Event: Command Complete (0x0e) plen 5 #480 [hci0] 43.847480
LE Set Extended Advertising Parameters (0x08|0x0036) ncmd 2
---> Status: Command Disallowed (0x0c)
TX power (selected): 0 dbm (0x00)
