Add support for 4000000 as secondary baudrate for NXP chipsets supporting max baudrate as 4M, and are close to the host processor on same PCB. This mainly helps with faster FW download. Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@xxxxxxx> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx> --- v2: Use the available 'max-speed' device tree property. (Krzysztof) v3: No Change v4: Add ref for max-speed. (Krzysztof) v5: Add ref for serial-peripheral-props.yaml. (Krzysztof) v6: Add info to commit message. (Krzysztof) --- .../devicetree/bindings/net/bluetooth/nxp,88w8987-bt.yaml | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/Documentation/devicetree/bindings/net/bluetooth/nxp,88w8987-bt.yaml b/Documentation/devicetree/bindings/net/bluetooth/nxp,88w8987-bt.yaml index 3ab60c70286f..bb9ab5dd3b4a 100644 --- a/Documentation/devicetree/bindings/net/bluetooth/nxp,88w8987-bt.yaml +++ b/Documentation/devicetree/bindings/net/bluetooth/nxp,88w8987-bt.yaml @@ -34,6 +34,13 @@ properties: This property depends on the module vendor's configuration. + max-speed: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: + - 3000000 + - 4000000 + default: 3000000 + firmware-name: maxItems: 1 @@ -78,6 +85,7 @@ examples: bluetooth { compatible = "nxp,88w8987-bt"; fw-init-baudrate = <3000000>; + max-speed = <4000000>; firmware-name = "uartuart8987_bt_v0.bin"; device-wakeup-gpios = <&gpio 11 GPIO_ACTIVE_HIGH>; nxp,wakein-pin = /bits/ 8 <18>; -- 2.34.1