This is required for passing PTS test cases:
- L2CAP/COS/CED/BI-14-C
Multiple Signaling Command in one PDU, Data Truncated, BR/EDR,
Connection Request
- L2CAP/COS/CED/BI-15-C
Multiple Signaling Command in one PDU, Data Truncated, BR/EDR,
Disconnection Request
The test procedure defined in L2CAP.TS.p39 for both tests is:
1. The Lower Tester sends a C-frame to the IUT with PDU Length set
to 8 and Channel ID set to the correct signaling channel for the
logical link. The Information payload contains one L2CAP_ECHO_REQ
packet with Data Length set to 0 with 0 octets of echo data and
one command packet and Data Length set as specified in Table 4.6
and the correct command data.
2. The IUT sends an L2CAP_ECHO_RSP PDU to the Lower Tester.
3. Perform alternative 3A, 3B, 3C, or 3D depending on the IUT’s
response.
Alternative 3A (IUT terminates the link):
3A.1 The IUT terminates the link.
3A.2 The test ends with a Pass verdict.
Alternative 3B (IUT discards the frame):
3B.1 The IUT does not send a reply to the Lower Tester.
Alternative 3C (IUT rejects PDU):
3C.1 The IUT sends an L2CAP_COMMAND_REJECT_RSP PDU to the
Lower Tester.
Alternative 3D (Any other IUT response):
3D.1 The Upper Tester issues a warning and the test ends.
4. The Lower Tester sends a C-frame to the IUT with PDU Length set
to 4 and Channel ID set to the correct signaling channel for the
logical link. The Information payload contains Data Length set to
0 with an L2CAP_ECHO_REQ packet with 0 octets of echo data.
5. The IUT sends an L2CAP_ECHO_RSP PDU to the Lower Tester.
With expected outcome:
In Steps 2 and 5, the IUT responds with an L2CAP_ECHO_RSP.
In Step 3A.1, the IUT terminates the link.
In Step 3B.1, the IUT does not send a reply to the Lower Tester.
In Step 3C.1, the IUT rejects the PDU.
In Step 3D.1, the IUT sends any valid response.
Currently PTS fails with the following logs:
Failed to receive ECHO RESPONSE.
And HCI logs:
> ACL Data RX: Handle 11 flags 0x02 dlen 20
L2CAP: Information Response (0x0b) ident 2 len 12
Type: Fixed channels supported (0x0003)
Result: Success (0x0000)
Channels: 0x000000000000002e
L2CAP Signaling (BR/EDR)
Connectionless reception
AMP Manager Protocol
L2CAP Signaling (LE)
> ACL Data RX: Handle 11 flags 0x02 dlen 13
frame too long
08 01 00 00 08 02 01 00 aa .........
Signed-off-by: Frédéric Danis <frederic.danis@xxxxxxxxxxxxx>
---
net/bluetooth/l2cap_core.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c
index f1c4b8bd7a8b..46b2884170fa 100644
--- a/net/bluetooth/l2cap_core.c
+++ b/net/bluetooth/l2cap_core.c
@@ -7539,6 +7539,11 @@ void l2cap_recv_acldata(struct hci_conn *hcon, struct sk_buff *skb, u16 flags)
if (skb->len > len) {
BT_ERR("Frame is too long (len %u, expected len %d)",
skb->len, len);
+ /* Process valid commands from the PDU before
+ * setting the socket unreliable
+ */
+ skb->len = len;
+ l2cap_recv_frame(conn, skb);
l2cap_conn_unreliable(conn, ECOMM);
goto drop;
}
--
2.43.0
