Hi
I found the blktests loop/004[1] failed on the latest
linux-block/for-next, and it was introduced from the commit[2] from my
testing,
please help check it and let me know if you need any info/testing, thanks.
[1]
# ./check loop/004
loop/004 (combine loop direct I/O mode and a custom block size) [failed]
runtime 2.770s ... 5.375s
--- tests/loop/004.out 2025-08-24 01:41:06.768628600 -0400
+++ /root/blktests/results/nodev/loop/004.out.bad 2025-08-24
10:01:44.489825116 -0400
@@ -1,4 +1,5 @@
Running loop/004
1
-769bd186841c10e5b1106b55986206c0e87fc05a7f565fdee01b5abcaff6ae78 -
+pwrite: No space left on device
+e3b0c44298fc1c149afbf4c8996fb92427ae41e4649b934ca495991b7852b855 -
Test complete
[2]
47b71abd5846 loop: use vfs_getattr_nosec for accurate file size
[3] dmesg
[ 279.880860] run blktests loop/004 at 2025-08-24 10:01:38
[ 280.249598] scsi_debug:sdebug_driver_probe: scsi_debug: trim
poll_queues to 0. poll_q/nr_hw = (0/1)
[ 280.259112] scsi host10: scsi_debug: version 0191 [20210520]
dev_size_mb=8, opts=0x0, submit_queues=1, statistics=0
[ 280.289850] scsi 10:0:0:0: Direct-Access Linux scsi_debug
0191 PQ: 0 ANSI: 7
[ 280.302147] scsi 10:0:0:0: Power-on or device reset occurred
[ 280.336792] sd 10:0:0:0: Attached scsi generic sg5 type 0
[ 280.342300] sd 10:0:0:0: [sdf] 2048 4096-byte logical blocks: (8.39
MB/8.00 MiB)
[ 280.343809] sd 10:0:0:0: [sdf] Write Protect is off
[ 280.343925] sd 10:0:0:0: [sdf] Mode Sense: 73 00 10 08
[ 280.347889] sd 10:0:0:0: [sdf] Write cache: enabled, read cache:
enabled, supports DPO and FUA
[ 280.355174] sd 10:0:0:0: [sdf] permanent stream count = 5
[ 280.359355] sd 10:0:0:0: [sdf] Preferred minimum I/O size 4096 bytes
[ 280.359503] sd 10:0:0:0: [sdf] Optimal transfer size 4194304 bytes
[ 280.506461] sd 10:0:0:0: [sdf] Attached SCSI disk
[ 285.158954] sd 10:0:0:0: [sdf] Synchronizing SCSI cache
--
Best Regards,
Yi Zhang
