From: Zhang Yi <yi.zhang@xxxxxxxxxx>
Test block device unmap write zeroes sysfs interface with various SCSI
debug devices. /sys/block/<disk>/queue/write_zeroes_unmap_max_hw_bytes
should equal to the write_zeroes_max_bytes if the SCSI device enable the
WRITE SAME command with unmap functionality, and it should return 0
otherwise. /sys/block/<disk>/queue/write_zeroes_unmap_max_bytes should
be equal to write_zeroes_unmap_max_hw_bytes by default, and we can
disable write zeroes support by setting it to zero.
Signed-off-by: Zhang Yi <yi.zhang@xxxxxxxxxx>
---
tests/scsi/010 | 84 ++++++++++++++++++++++++++++++++++++++++++++++
tests/scsi/010.out | 2 ++
2 files changed, 86 insertions(+)
create mode 100755 tests/scsi/010
create mode 100644 tests/scsi/010.out
diff --git a/tests/scsi/010 b/tests/scsi/010
new file mode 100755
index 0000000..c5152a4
--- /dev/null
+++ b/tests/scsi/010
@@ -0,0 +1,84 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-3.0+
+# Copyright (C) 2025 Huawei.
+#
+# Test block device unmap write zeroes sysfs interface with various scsi
+# devices.
+
+. tests/scsi/rc
+. common/scsi_debug
+
+DESCRIPTION="test unmap write zeroes sysfs interface with scsi devices"
+QUICK=1
+
+requires() {
+ _have_scsi_debug
+}
+
+setup_test_device() {
+ if ! _configure_scsi_debug "$@"; then
+ return 1
+ fi
+
+ if [[ ! -f /sys/block/${SCSI_DEBUG_DEVICES[0]}/queue/write_zeroes_unmap_max_hw_bytes ]]; then
+ _exit_scsi_debug
+ SKIP_REASONS+=("kernel does not support unmap write zeroes sysfs interface")
+ return 1
+ fi
+}
+
+test() {
+ echo "Running ${TEST_NAME}"
+
+ # disable WRITE SAME with unmap
+ if ! setup_test_device lbprz=0; then
+ return 1
+ fi
+
+ umap_hw_bytes="$(cat "/sys/block/${SCSI_DEBUG_DEVICES[0]}/queue/write_zeroes_unmap_max_hw_bytes")"
+ umap_bytes="$(cat "/sys/block/${SCSI_DEBUG_DEVICES[0]}/queue/write_zeroes_unmap_max_bytes")"
+ if [[ $umap_hw_bytes -ne 0 || $umap_bytes -ne 0 ]]; then
+ echo "Test disable WRITE SAME with unmap failed."
+ fi
+ _exit_scsi_debug
+
+ # enable WRITE SAME(16) with unmap
+ if ! setup_test_device lbprz=1 lbpws=1; then
+ return 1
+ fi
+
+ zero_bytes="$(cat "/sys/block/${SCSI_DEBUG_DEVICES[0]}/queue/write_zeroes_max_bytes")"
+ umap_hw_bytes="$(cat "/sys/block/${SCSI_DEBUG_DEVICES[0]}/queue/write_zeroes_unmap_max_hw_bytes")"
+ umap_bytes="$(cat "/sys/block/${SCSI_DEBUG_DEVICES[0]}/queue/write_zeroes_unmap_max_bytes")"
+ if [[ $umap_hw_bytes -ne $zero_bytes || $umap_bytes -ne $zero_bytes ]]; then
+ echo "Test enable WRITE SAME(16) with unmap failed."
+ fi
+
+ echo 0 > "/sys/block/${SCSI_DEBUG_DEVICES[0]}/queue/write_zeroes_unmap_max_bytes"
+ umap_bytes="$(cat "/sys/block/${SCSI_DEBUG_DEVICES[0]}/queue/write_zeroes_unmap_max_bytes")"
+ if [[ $umap_bytes -ne 0 ]]; then
+ echo "Test manually disable WRITE SAME(16) with unmap failed."
+ fi
+ _exit_scsi_debug
+
+ # enable WRITE SAME(10) with unmap
+ if ! setup_test_device lbprz=1 lbpws10=1; then
+ return 1
+ fi
+
+ zero_bytes="$(cat "/sys/block/${SCSI_DEBUG_DEVICES[0]}/queue/write_zeroes_max_bytes")"
+ umap_hw_bytes="$(cat "/sys/block/${SCSI_DEBUG_DEVICES[0]}/queue/write_zeroes_unmap_max_hw_bytes")"
+ umap_bytes="$(cat "/sys/block/${SCSI_DEBUG_DEVICES[0]}/queue/write_zeroes_unmap_max_bytes")"
+ if [[ $umap_hw_bytes -ne $zero_bytes || $umap_bytes -ne $zero_bytes ]]; then
+ echo "Test enable WRITE SAME(10) with unmap failed."
+ fi
+
+ echo 0 > "/sys/block/${SCSI_DEBUG_DEVICES[0]}/queue/write_zeroes_unmap_max_bytes"
+ umap_bytes="$(cat "/sys/block/${SCSI_DEBUG_DEVICES[0]}/queue/write_zeroes_unmap_max_bytes")"
+ if [[ $umap_bytes -ne 0 ]]; then
+ echo "Test manually disable WRITE SAME(10) with unmap failed."
+ fi
+ _exit_scsi_debug
+
+ echo "Test complete"
+}
diff --git a/tests/scsi/010.out b/tests/scsi/010.out
new file mode 100644
index 0000000..6581d5e
--- /dev/null
+++ b/tests/scsi/010.out
@@ -0,0 +1,2 @@
+Running scsi/010
+Test complete
--
2.39.2
