Qualcomm SA8775P SoC contains 4 Camera Control Interface controllers.
Signed-off-by: Wenmeng Liu <quic_wenmliu@xxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/lemans.dtsi | 268 +++++++++++++++++++++++++++++++++++
1 file changed, 268 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/lemans.dtsi b/arch/arm64/boot/dts/qcom/lemans.dtsi
index 67d1e293861970e9ddfc0df1bb674aeffb6bee6f..ba2715eee4fbf705b790a46c3b09eb20007b32b5 100644
--- a/arch/arm64/boot/dts/qcom/lemans.dtsi
+++ b/arch/arm64/boot/dts/qcom/lemans.dtsi
@@ -4358,6 +4358,162 @@ videocc: clock-controller@abf0000 {
#power-domain-cells = <1>;
};
+ cci0: cci@ac13000 {
+ compatible = "qcom,sa8775p-cci", "qcom,msm8996-cci";
+ reg = <0x0 0x0ac13000 0x0 0x1000>;
+
+ interrupts = <GIC_SPI 460 IRQ_TYPE_EDGE_RISING>;
+
+ power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
+
+ clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
+ <&camcc CAM_CC_CPAS_AHB_CLK>,
+ <&camcc CAM_CC_CCI_0_CLK>;
+ clock-names = "camnoc_axi",
+ "cpas_ahb",
+ "cci";
+
+ pinctrl-0 = <&cci0_0_default &cci0_1_default>;
+ pinctrl-1 = <&cci0_0_sleep &cci0_1_sleep>;
+ pinctrl-names = "default", "sleep";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+
+ cci0_i2c0: i2c-bus@0 {
+ reg = <0>;
+ clock-frequency = <1000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ cci0_i2c1: i2c-bus@1 {
+ reg = <1>;
+ clock-frequency = <1000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ cci1: cci@ac14000 {
+ compatible = "qcom,sa8775p-cci", "qcom,msm8996-cci";
+ reg = <0x0 0x0ac14000 0x0 0x1000>;
+
+ interrupts = <GIC_SPI 271 IRQ_TYPE_EDGE_RISING>;
+
+ power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
+
+ clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
+ <&camcc CAM_CC_CPAS_AHB_CLK>,
+ <&camcc CAM_CC_CCI_1_CLK>;
+ clock-names = "camnoc_axi",
+ "cpas_ahb",
+ "cci";
+
+ pinctrl-0 = <&cci1_0_default &cci1_1_default>;
+ pinctrl-1 = <&cci1_0_sleep &cci1_1_sleep>;
+ pinctrl-names = "default", "sleep";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+
+ cci1_i2c0: i2c-bus@0 {
+ reg = <0>;
+ clock-frequency = <1000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ cci1_i2c1: i2c-bus@1 {
+ reg = <1>;
+ clock-frequency = <1000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ cci2: cci@ac15000 {
+ compatible = "qcom,sa8775p-cci", "qcom,msm8996-cci";
+ reg = <0x0 0x0ac15000 0x0 0x1000>;
+
+ interrupts = <GIC_SPI 651 IRQ_TYPE_EDGE_RISING>;
+
+ power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
+
+ clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
+ <&camcc CAM_CC_CPAS_AHB_CLK>,
+ <&camcc CAM_CC_CCI_2_CLK>;
+ clock-names = "camnoc_axi",
+ "cpas_ahb",
+ "cci";
+
+ pinctrl-0 = <&cci2_0_default &cci2_1_default>;
+ pinctrl-1 = <&cci2_0_sleep &cci2_1_sleep>;
+ pinctrl-names = "default", "sleep";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+
+ cci2_i2c0: i2c-bus@0 {
+ reg = <0>;
+ clock-frequency = <1000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ cci2_i2c1: i2c-bus@1 {
+ reg = <1>;
+ clock-frequency = <1000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ cci3: cci@ac16000 {
+ compatible = "qcom,sa8775p-cci", "qcom,msm8996-cci";
+ reg = <0x0 0x0ac16000 0x0 0x1000>;
+
+ interrupts = <GIC_SPI 771 IRQ_TYPE_EDGE_RISING>;
+
+ power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
+
+ clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
+ <&camcc CAM_CC_CPAS_AHB_CLK>,
+ <&camcc CAM_CC_CCI_3_CLK>;
+ clock-names = "camnoc_axi",
+ "cpas_ahb",
+ "cci";
+
+ pinctrl-0 = <&cci3_0_default &cci3_1_default>;
+ pinctrl-1 = <&cci3_0_sleep &cci3_1_sleep>;
+ pinctrl-names = "default", "sleep";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+
+ cci3_i2c0: i2c-bus@0 {
+ reg = <0>;
+ clock-frequency = <1000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ cci3_i2c1: i2c-bus@1 {
+ reg = <1>;
+ clock-frequency = <1000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
camss: isp@ac78000 {
compatible = "qcom,sa8775p-camss";
@@ -5189,6 +5345,118 @@ tlmm: pinctrl@f000000 {
gpio-ranges = <&tlmm 0 0 149>;
wakeup-parent = <&pdc>;
+ cci0_0_default: cci0-0-default-state {
+ pins = "gpio60", "gpio61";
+ function = "cci_i2c";
+ drive-strength = <2>;
+ bias-pull-up = <2200>;
+ };
+
+ cci0_0_sleep: cci0-0-sleep-state {
+ pins = "gpio60", "gpio61";
+ function = "cci_i2c";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ cci0_1_default: cci0-1-default-state {
+ pins = "gpio52", "gpio53";
+ function = "cci_i2c";
+ drive-strength = <2>;
+ bias-pull-up = <2200>;
+ };
+
+ cci0_1_sleep: cci0-1-sleep-state {
+ pins = "gpio52", "gpio53";
+ function = "cci_i2c";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ cci1_0_default: cci1-0-default-state {
+ pins = "gpio62", "gpio63";
+ function = "cci_i2c";
+ drive-strength = <2>;
+ bias-pull-up = <2200>;
+ };
+
+ cci1_0_sleep: cci1-0-sleep-state {
+ pins = "gpio62", "gpio63";
+ function = "cci_i2c";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ cci1_1_default: cci1-1-default-state {
+ pins = "gpio54", "gpio55";
+ function = "cci_i2c";
+ drive-strength = <2>;
+ bias-pull-up = <2200>;
+ };
+
+ cci1_1_sleep: cci1-1-sleep-state {
+ pins = "gpio54", "gpio55";
+ function = "cci_i2c";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ cci2_0_default: cci2-0-default-state {
+ pins = "gpio64", "gpio65";
+ function = "cci_i2c";
+ drive-strength = <2>;
+ bias-pull-up = <2200>;
+ };
+
+ cci2_0_sleep: cci2-0-sleep-state {
+ pins = "gpio64", "gpio65";
+ function = "cci_i2c";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ cci2_1_default: cci2-1-default-state {
+ pins = "gpio56", "gpio57";
+ function = "cci_i2c";
+ drive-strength = <2>;
+ bias-pull-up = <2200>;
+ };
+
+ cci2_1_sleep: cci2-1-sleep-state {
+ pins = "gpio56", "gpio57";
+ function = "cci_i2c";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ cci3_0_default: cci3-0-default-state {
+ pins = "gpio66", "gpio67";
+ function = "cci_i2c";
+ drive-strength = <2>;
+ bias-pull-up = <2200>;
+ };
+
+ cci3_0_sleep: cci3-0-sleep-state {
+ pins = "gpio66", "gpio67";
+ function = "cci_i2c";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ cci3_1_default: cci3-1-default-state {
+ pins = "gpio58", "gpio59";
+ function = "cci_i2c";
+ drive-strength = <2>;
+ bias-pull-up = <2200>;
+ };
+
+ cci3_1_sleep: cci3-1-sleep-state {
+ pins = "gpio58", "gpio59";
+ function = "cci_i2c";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
qup_i2c0_default: qup-i2c0-state {
pins = "gpio20", "gpio21";
function = "qup0_se0";
