On 19/08/2025 08:50, Praveen Talari wrote: > Hi Alexey. > > Thank you for your patience, > > On 8/12/2025 3:35 PM, Alexey Klimov wrote: >> (c/c Neil and Srini) >> >> On Mon Jul 21, 2025 at 6:45 PM BST, Praveen Talari wrote: >>> The GENI serial driver currently handles power resource management >>> through calls to the statically defined geni_serial_resources_on() and >>> geni_serial_resources_off() functions. This approach reduces modularity >>> and limits support for platforms with diverse power management >>> mechanisms, including resource managed by firmware. >>> >>> Improve modularity and enable better integration with platform-specific >>> power management, introduce support for runtime PM. Use >>> pm_runtime_resume_and_get() and pm_runtime_put_sync() within the >>> qcom_geni_serial_pm() callback to control resource power state >>> transitions based on UART power state changes. >>> >>> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@xxxxxxxxxx> >>> Signed-off-by: Praveen Talari <quic_ptalari@xxxxxxxxxxx> >> >> >> This breaks at least RB1 (QRB2210), maybe others. >> Currently broken on -master and on linux-next. >> >> Upon login prompt random parts of kernel seems to be off/failed and >> debugging led to udev being stuck: >> >> [ 85.369834] INFO: task kworker/u16:0:12 blocked for more than 42 seconds. >> [ 85.376699] Not tainted 6.17.0-rc1-00004-g53e760d89498 #9 >> [ 85.382660] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. >> [ 85.390547] task:kworker/u16:0 state:D stack:0 pid:12 tgid:12 ppid:2 task_flags:0x4208060 flags:0x00000010 >> [ 85.401748] Workqueue: async async_run_entry_fn >> [ 85.406349] Call trace: >> [ 85.408828] __switch_to+0xe8/0x1a0 (T) >> [ 85.412724] __schedule+0x290/0x7c0 >> [ 85.416275] schedule+0x34/0x118 >> [ 85.419554] rpm_resume+0x14c/0x66c >> [ 85.423111] rpm_resume+0x2a4/0x66c >> [ 85.426647] rpm_resume+0x2a4/0x66c >> [ 85.430188] rpm_resume+0x2a4/0x66c >> [ 85.433722] __pm_runtime_resume+0x50/0x9c >> [ 85.437869] __driver_probe_device+0x58/0x120 >> [ 85.442287] driver_probe_device+0x3c/0x154 >> [ 85.446523] __driver_attach_async_helper+0x4c/0xc0 >> [ 85.451446] async_run_entry_fn+0x34/0xe0 >> [ 85.455504] process_one_work+0x148/0x290 >> [ 85.459565] worker_thread+0x2c4/0x3e0 >> [ 85.463368] kthread+0x118/0x1c0 >> [ 85.466651] ret_from_fork+0x10/0x20 >> [ 85.470337] INFO: task irq/92-4a8c000.:71 blocked for more than 42 seconds. >> [ 85.477351] Not tainted 6.17.0-rc1-00004-g53e760d89498 #9 >> [ 85.483323] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. >> [ 85.491195] task:irq/92-4a8c000. state:D stack:0 pid:71 tgid:71 ppid:2 task_flags:0x208040 flags:0x00000010 >> [ 85.502290] Call trace: >> [ 85.504786] __switch_to+0xe8/0x1a0 (T) >> [ 85.508687] __schedule+0x290/0x7c0 >> [ 85.512231] schedule+0x34/0x118 >> [ 85.515504] __synchronize_irq+0x60/0xa0 >> [ 85.519483] disable_irq+0x3c/0x4c >> [ 85.522929] msm_pinmux_set_mux+0x3a8/0x44c >> [ 85.527167] pinmux_enable_setting+0x1c4/0x28c >> [ 85.531665] pinctrl_commit_state+0xa0/0x260 >> [ 85.535989] pinctrl_pm_select_default_state+0x4c/0xa0 >> [ 85.541182] geni_se_resources_on+0xd0/0x15c >> [ 85.545522] geni_serial_resource_state+0x8c/0xbc >> [ 85.550282] qcom_geni_serial_runtime_resume+0x24/0x3c >> [ 85.555470] pm_generic_runtime_resume+0x2c/0x44 >> [ 85.560139] __rpm_callback+0x48/0x1e0 >> [ 85.563949] rpm_callback+0x74/0x80 >> [ 85.567494] rpm_resume+0x39c/0x66c >> [ 85.571040] __pm_runtime_resume+0x50/0x9c >> [ 85.575193] handle_threaded_wake_irq+0x30/0x80 >> [ 85.579771] irq_thread_fn+0x2c/0xb0 >> [ 85.583443] irq_thread+0x16c/0x278 >> [ 85.587003] kthread+0x118/0x1c0 >> [ 85.590283] ret_from_fork+0x10/0x20 >> [ 85.593943] INFO: task (udev-worker):228 blocked for more than 42 seconds. >> [ 85.600873] Not tainted 6.17.0-rc1-00004-g53e760d89498 #9 >> [ 85.606846] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. >> [ 85.614717] task:(udev-worker) state:D stack:0 pid:228 tgid:228 ppid:222 task_flags:0x400140 flags:0x00000818 >> [ 85.625823] Call trace: >> [ 85.628316] __switch_to+0xe8/0x1a0 (T) >> [ 85.632217] __schedule+0x290/0x7c0 >> [ 85.635765] schedule+0x34/0x118 >> [ 85.639044] async_synchronize_cookie_domain.part.0+0x50/0xa4 >> [ 85.644854] async_synchronize_full+0x78/0xa0 >> [ 85.649270] do_init_module+0x190/0x23c >> [ 85.653154] load_module+0x1708/0x1ca0 >> [ 85.656952] init_module_from_file+0x74/0xa0 >> [ 85.661273] __arm64_sys_finit_module+0x130/0x2f8 >> [ 85.666023] invoke_syscall+0x48/0x104 >> [ 85.669842] el0_svc_common.constprop.0+0xc0/0xe0 >> [ 85.674604] do_el0_svc+0x1c/0x28 >> [ 85.677973] el0_svc+0x2c/0x84 >> [ 85.681078] el0t_64_sync_handler+0xa0/0xe4 >> [ 85.685316] el0t_64_sync+0x198/0x19c >> [ 85.689032] INFO: task (udev-worker):229 blocked for more than 42 seconds. >> >> >> Usually wifi, all remoteprocs and anything that depends on lpass/pinctrl fail to probe. > > May i know what is testcase which you are running on target? Boot the board? > what is target? It is written in original report. Did you even read it? > Which usecase is this issue occurring in? Boot? Best regards, Krzysztof
