On 2025/8/15 15:07, Wenmeng Liu wrote:
This series adds cci definition and imx577 sensor enablement via cci1 on lemans evk. An example media-ctl pipeline for the imx577 is: media-ctl -d /dev/media0 --reset media-ctl -d /dev/media0 -V '"imx577 0-001a":0[fmt:SRGGB10/4056x3040 field:none]' media-ctl -d /dev/media0 -V '"msm_csiphy1":0[fmt:SRGGB10/4056x3040]' media-ctl -d /dev/media0 -V '"msm_csid0":0[fmt:SRGGB10/4056x3040]' media-ctl -d /dev/media0 -V '"msm_vfe0_rdi0":0[fmt:SRGGB10/4056x3040]' media-ctl -d /dev/media0 -l '"msm_csiphy1":1->"msm_csid0":0[1]' media-ctl -d /dev/media0 -l '"msm_csid0":1->"msm_vfe0_rdi0":0[1]' yavta -B capture-mplane -n 5 -f SRGGB10P -s 4056x3040 -F /dev/video0 --capture=5 Changes in V2: - Remove the patch that adds PHY supply documentation in the sa8775p CAMSS bindings. This change should be submitted together with the sa8775p bindings patch. - Fix the string ordering in the DTS file. - Remove the source clock from the CCI node. - Move the sensor enable configuration from lemans-evk.dts to lemans-evk-camera.dtso. - Remove the definitions for CCI and regulators that are not enabled. - Link to v1: https://lore.kernel.org/all/20250514-rb8_camera-v1-0-bf4a39e304e9@xxxxxxxxxxx/ Signed-off-by: Wenmeng Liu <quic_wenmliu@xxxxxxxxxxx> --- Wenmeng Liu (3): dt-bindings: i2c: qcom-cci: Document sa8775p compatible arm64: dts: qcom: sa8775p: Add CCI definitions arm64: dts: qcom: lemans-evk-camera: Add DT overlay .../devicetree/bindings/i2c/qcom,i2c-cci.yaml | 2 + arch/arm64/boot/dts/qcom/Makefile | 4 + arch/arm64/boot/dts/qcom/lemans-evk-camera.dtso | 105 ++++++++ arch/arm64/boot/dts/qcom/lemans.dtsi | 268 +++++++++++++++++++++ 4 files changed, 379 insertions(+) --- base-commit: f0d48d68b1e7323d253068c5d4f7b470c5e927de change-id: 20250815-rb8_camera-877517c45388 Best regards,
Lack of dependence: This patch series depends on patch series: https://lore.kernel.org/linux-arm-msm/20250814101615.1102795-1-quic_vikramsa@xxxxxxxxxxx/ Thanks Wenmeng
