Re: [PATCH 3/3] arm64: dts: qcom: sa8775p: Add clocks for QoS configuration

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 8/13/25 8:45 AM, Odelu Kukatla wrote:


On 8/12/2025 3:21 PM, Konrad Dybcio wrote:
On 8/8/25 4:03 PM, Odelu Kukatla wrote:
Add register addresses and clocks which need to be enabled for
configuring QoS on sa8775p SoC.

Signed-off-by: Odelu Kukatla <odelu.kukatla@xxxxxxxxxxxxxxxx>
---

[...]

+		system_noc: interconnect@01680000 {

stray leading zero

Thanks for the review, i will address this in next revision.> I also see there's a camera noc.. are these controlled internally
by Titan nowadays?

Yes, camera NoC is controlled internally.
By internally, do you mean that it's controlled by some camera driver? Why the camnoc is not using the interconnect framework?

Thanks,
Georgi




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux