Add missing address-cells 0 to GIC interrupt node to silence W=1
warning:
sm8150.dtsi:1869.4-1872.30: Warning (interrupt_map): /soc@0/pcie@1c00000:interrupt-map:
Missing property '#address-cells' in node /soc@0/interrupt-controller@17a00000, using 0 as fallback
Value '0' is correct because:
1. GIC interrupt controller does not have children,
2. interrupt-map property (in PCI node) consists of five components and
the fourth component "parent unit address", which size is defined by
'#address-cells' of the node pointed to by the interrupt-parent
component, is not used (=0).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sm8150.dtsi | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
index 4b347ee3244100a4db515515b73575383c5a0cb7..12e7b74cde520009d73d381adfa1deeb8788621b 100644
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -4366,6 +4366,7 @@ compute-cb@5 {
intc: interrupt-controller@17a00000 {
compatible = "arm,gic-v3";
interrupt-controller;
+ #address-cells = <0>;
#interrupt-cells = <3>;
reg = <0x0 0x17a00000 0x0 0x10000>, /* GICD */
<0x0 0x17a60000 0x0 0x100000>; /* GICR * 8 */
--
2.48.1
