At the moment, we indirectly rely on the boot firmware to set up the
pinctrl for the eDP HPD line coming from the internal display. If the boot
firmware does not configure the display (e.g. because a different display
is selected for output in the UEFI settings), then the display fails to
come up and there are several errors in the kernel log:
[drm:dpu_encoder_phys_vid_wait_for_commit_done:544] [dpu error]vblank timeout: 80020041
[drm:dpu_kms_wait_for_commit_done:524] [dpu error]wait for commit done returned -110
[drm:dpu_encoder_frame_done_timeout:2715] [dpu error]enc40 frame done timeout
...
Fix this by adding the missing pinctrl for gpio119 (func1/edp0_hot and
bias-disable according to the ACPI DSDT), which is defined as
&edp0_hpd_default template in x1e80100.dtsi.
Fixes: d7e03cce0400 ("arm64: dts: qcom: x1e80100-crd: Enable more support")
Signed-off-by: Stephan Gerhold <stephan.gerhold@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/x1-crd.dtsi | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/x1-crd.dtsi b/arch/arm64/boot/dts/qcom/x1-crd.dtsi
index e3d2fc342bd184473b37882f3bc4f9c4d23135bd..92fbb03291975f60f41f4ebfc2505bdc9879a5cf 100644
--- a/arch/arm64/boot/dts/qcom/x1-crd.dtsi
+++ b/arch/arm64/boot/dts/qcom/x1-crd.dtsi
@@ -1174,6 +1174,9 @@ &mdss_dp2_out {
&mdss_dp3 {
/delete-property/ #sound-dai-cells;
+ pinctrl-0 = <&edp0_hpd_default>;
+ pinctrl-names = "default";
+
status = "okay";
aux-bus {
--
2.50.1
