On Wed, Aug 20, 2025 at 07:58:35PM +0530, Prahlad Valluru wrote: > From: Shashank Maurya <quic_ssmaurya@xxxxxxxxxxx> > > Lemans EVK board has two mini-DP connectors, connected to EDP0 > and EDP1 phys. Other EDP phys are available on expansion > connectors for the mezzanine boards. > Enable EDP0 and EDP1 along with their corresponding PHYs. > > Signed-off-by: Shashank Maurya <quic_ssmaurya@xxxxxxxxxxx> > Signed-off-by: Prahlad Valluru <venkata.valluru@xxxxxxxxxxxxxxxx> > --- > Changes in v2: > - added dp-connector nodes for edp0 and edp1. > - Link to v1: https://lore.kernel.org/r/20250711-enable-iq9-dp-v1-1-6d381e105473@xxxxxxxxxxxxxxxx > --- > arch/arm64/boot/dts/qcom/lemans-evk.dts | 84 +++++++++++++++++++++++++++++++++ > 1 file changed, 84 insertions(+) > > @@ -261,6 +331,20 @@ &sleep_clk { > clock-frequency = <32768>; > }; > > +&tlmm { > + dp0_hot_plug_det: dp0-hot-plug-det-state { > + pins = "gpio101"; > + function = "edp0_hot"; > + bias-disable; > + }; > + > + dp1_hot_plug_det: dp1-hot-plug-det-state { > + pins = "gpio102"; > + function = "edp1_hot"; > + bias-disable; > + }; Please move these to the SoC dtsi. > +}; > + > &uart10 { > compatible = "qcom,geni-debug-uart"; > pinctrl-0 = <&qup_uart10_default>; > > --- > base-commit: 1aa50d938e88fcad1312467bd09be4037bfe68ff > change-id: 20250711-enable-iq9-dp-addc9c7195c9 > > Best regards, > -- > Prahlad Valluru <venkata.valluru@xxxxxxxxxxxxxxxx> > -- With best wishes Dmitry
