Ever since these two commits
fbd908bb8bc0 ("interconnect: qcom: sc7280: enable QoS configuration")
2b5004956aff ("arm64: dts: qcom: sc7280: Add clocks for QOS configuration")
Herobrine systems fail to boot due to crashes like the following:
[ 0.243171] Kernel panic - not syncing: Asynchronous SError Interrupt
[ 0.243173] CPU: 7 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.11.0 #1 c5464041cff584ced692726af2c4400fa2bde1db
[ 0.243178] Hardware name: Qualcomm Technologies, Inc. sc7280 CRD platform (rev5+) (DT)
[ 0.243180] Call trace:
[ 0.243182] dump_backtrace+0x104/0x128
[ 0.243194] show_stack+0x24/0x38
[ 0.243202] __dump_stack+0x28/0x38
[ 0.243208] dump_stack_lvl+0x28/0xb8
[ 0.243211] dump_stack+0x18/0x30
[ 0.243215] panic+0x134/0x340
[ 0.243219] nmi_panic+0x48/0x98
[ 0.243227] arm64_serror_panic+0x6c/0x80
[ 0.243245] arm64_is_fatal_ras_serror+0xd8/0xe0
[ 0.243261] do_serror+0x5c/0xa8
[ 0.243265] el1h_64_error_handler+0x34/0x48
[ 0.243272] el1h_64_error+0x7c/0x80
[ 0.243285] regmap_mmio_read+0x5c/0xc0
[ 0.243289] _regmap_bus_reg_read+0x78/0xf8
[ 0.243296] regmap_update_bits_base+0xec/0x3a8
[ 0.243300] qcom_icc_rpmh_probe+0x2d4/0x490
[ 0.243308] platform_probe+0xb4/0xe0
[...]
Specifically, they fail in qcom_icc_set_qos() when trying to write the
QoS settings for qhm_qup1. Several of the previous nodes (qhm_qspi,
qhm_qup0, ...) seem to configure without crashing.
I don't really know what's unique about Herobrine systems vs other
sc7280 systems that presumably work fine. I'd guess there's some
conflict with something configured by the boot firmware.
I'm submitting as an RFC just to get thoughts from people who hopefully
know better than me what might be going wrong here.
Fixes: fbd908bb8bc0 ("interconnect: qcom: sc7280: enable QoS configuration")
Fixes: 2b5004956aff ("arm64: dts: qcom: sc7280: Add clocks for QOS configuration")
Signed-off-by: Brian Norris <briannorris@xxxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
index 2ba4ea60cb14..59203ce58c61 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
@@ -394,6 +394,16 @@ &vreg_l2c_1p8 {
/* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */
+/* QoS seems to have conflicts with boot firmware on these devices. */
+&aggre1_noc {
+ /delete-property/ clocks;
+};
+
+/* QoS seems to have conflicts with boot firmware on these devices. */
+&aggre2_noc {
+ /delete-property/ clocks;
+};
+
&edp_panel {
/* Our board provides power to the qcard for the eDP panel. */
power-supply = <&vreg_edp_3p3>;
--
2.51.0.rc2.233.g662b1ed5c5-goog
