From: Fenglin Wu <fenglin.wu@xxxxxxxxxxxxxxxx>
Add charge control support for SM8550 and X1E80100. It's supported
with below two power supply properties:
charge_control_end_threshold: The battery SoC (State of Charge)
threshold at which the charging should be terminated.
charge_control_start_threshold: The battery SoC threshold at
which the charging should be resumed.
Signed-off-by: Fenglin Wu <fenglin.wu@xxxxxxxxxxxxxxxx>
---
drivers/power/supply/qcom_battmgr.c | 290 +++++++++++++++++++++++++++++++++++-
1 file changed, 283 insertions(+), 7 deletions(-)
diff --git a/drivers/power/supply/qcom_battmgr.c b/drivers/power/supply/qcom_battmgr.c
index 174d3f83ac2b070bb90c21a498686e91cc629ebe..23c68eb942f1b213f634e31a45420b3e113e2764 100644
--- a/drivers/power/supply/qcom_battmgr.c
+++ b/drivers/power/supply/qcom_battmgr.c
@@ -7,6 +7,7 @@
#include <linux/auxiliary_bus.h>
#include <linux/module.h>
#include <linux/mutex.h>
+#include <linux/nvmem-consumer.h>
#include <linux/of_device.h>
#include <linux/power_supply.h>
#include <linux/property.h>
@@ -68,6 +69,9 @@ enum qcom_battmgr_variant {
#define BATT_RESISTANCE 21
#define BATT_POWER_NOW 22
#define BATT_POWER_AVG 23
+#define BATT_CHG_CTRL_EN 24
+#define BATT_CHG_CTRL_START_THR 25
+#define BATT_CHG_CTRL_END_THR 26
#define BATTMGR_USB_PROPERTY_GET 0x32
#define BATTMGR_USB_PROPERTY_SET 0x33
@@ -92,6 +96,13 @@ enum qcom_battmgr_variant {
#define WLS_TYPE 5
#define WLS_BOOST_EN 6
+#define BATTMGR_CHG_CTRL_LIMIT_EN 0x48
+#define CHARGE_CTRL_START_THR_MIN 50
+#define CHARGE_CTRL_START_THR_MAX 95
+#define CHARGE_CTRL_END_THR_MIN 55
+#define CHARGE_CTRL_END_THR_MAX 100
+#define CHARGE_CTRL_DELTA_SOC 5
+
struct qcom_battmgr_enable_request {
struct pmic_glink_hdr hdr;
__le32 battery_id;
@@ -126,6 +137,13 @@ struct qcom_battmgr_discharge_time_request {
__le32 reserved;
};
+struct qcom_battmgr_charge_ctrl_request {
+ struct pmic_glink_hdr hdr;
+ __le32 enable;
+ __le32 target_soc;
+ __le32 delta_soc;
+};
+
struct qcom_battmgr_message {
struct pmic_glink_hdr hdr;
union {
@@ -238,6 +256,8 @@ struct qcom_battmgr_info {
unsigned int capacity_warning;
unsigned int cycle_count;
unsigned int charge_count;
+ unsigned int charge_ctrl_start;
+ unsigned int charge_ctrl_end;
char model_number[BATTMGR_STRING_LEN];
char serial_number[BATTMGR_STRING_LEN];
char oem_info[BATTMGR_STRING_LEN];
@@ -426,6 +446,8 @@ static const u8 sm8350_bat_prop_map[] = {
[POWER_SUPPLY_PROP_INTERNAL_RESISTANCE] = BATT_RESISTANCE,
[POWER_SUPPLY_PROP_STATE_OF_HEALTH] = BATT_SOH,
[POWER_SUPPLY_PROP_POWER_NOW] = BATT_POWER_NOW,
+ [POWER_SUPPLY_PROP_CHARGE_CONTROL_START_THRESHOLD] = BATT_CHG_CTRL_START_THR,
+ [POWER_SUPPLY_PROP_CHARGE_CONTROL_END_THRESHOLD] = BATT_CHG_CTRL_END_THR,
};
static int qcom_battmgr_bat_sm8350_update(struct qcom_battmgr *battmgr,
@@ -496,7 +518,8 @@ static int qcom_battmgr_bat_get_property(struct power_supply *psy,
if (!battmgr->service_up)
return -EAGAIN;
- if (battmgr->variant == QCOM_BATTMGR_SC8280XP)
+ if (battmgr->variant == QCOM_BATTMGR_SC8280XP ||
+ battmgr->variant == QCOM_BATTMGR_X1E80100)
ret = qcom_battmgr_bat_sc8280xp_update(battmgr, psp);
else
ret = qcom_battmgr_bat_sm8350_update(battmgr, psp);
@@ -601,6 +624,12 @@ static int qcom_battmgr_bat_get_property(struct power_supply *psy,
case POWER_SUPPLY_PROP_TIME_TO_FULL_AVG:
val->intval = battmgr->status.charge_time;
break;
+ case POWER_SUPPLY_PROP_CHARGE_CONTROL_START_THRESHOLD:
+ val->intval = battmgr->info.charge_ctrl_start;
+ break;
+ case POWER_SUPPLY_PROP_CHARGE_CONTROL_END_THRESHOLD:
+ val->intval = battmgr->info.charge_ctrl_end;
+ break;
case POWER_SUPPLY_PROP_MANUFACTURE_YEAR:
val->intval = battmgr->info.year;
break;
@@ -626,6 +655,149 @@ static int qcom_battmgr_bat_get_property(struct power_supply *psy,
return 0;
}
+static int qcom_battmgr_set_charge_control(struct qcom_battmgr *battmgr,
+ u32 target_soc, u32 delta_soc)
+{
+ struct qcom_battmgr_charge_ctrl_request request = {
+ .hdr.owner = cpu_to_le32(PMIC_GLINK_OWNER_BATTMGR),
+ .hdr.type = cpu_to_le32(PMIC_GLINK_REQ_RESP),
+ .hdr.opcode = cpu_to_le32(BATTMGR_CHG_CTRL_LIMIT_EN),
+ .enable = cpu_to_le32(1),
+ .target_soc = cpu_to_le32(target_soc),
+ .delta_soc = cpu_to_le32(delta_soc),
+ };
+
+ return qcom_battmgr_request(battmgr, &request, sizeof(request));
+}
+
+static int qcom_battmgr_set_charge_start_threshold(struct qcom_battmgr *battmgr, int start_soc)
+{
+ u32 target_soc, delta_soc;
+ int ret;
+
+ if (start_soc < CHARGE_CTRL_START_THR_MIN ||
+ start_soc > CHARGE_CTRL_START_THR_MAX) {
+ dev_err(battmgr->dev, "charge control start threshold exceed range: [%u - %u]\n",
+ CHARGE_CTRL_START_THR_MIN, CHARGE_CTRL_START_THR_MAX);
+ return -EINVAL;
+ }
+
+ /*
+ * If the new start threshold is larger than the old end threshold,
+ * move the end threshold one step (DELTA_SOC) after the new start
+ * threshold.
+ */
+ if (start_soc > battmgr->info.charge_ctrl_end) {
+ target_soc = start_soc + CHARGE_CTRL_DELTA_SOC;
+ target_soc = min_t(u32, target_soc, CHARGE_CTRL_END_THR_MAX);
+ delta_soc = target_soc - start_soc;
+ delta_soc = min_t(u32, delta_soc, CHARGE_CTRL_DELTA_SOC);
+ } else {
+ target_soc = battmgr->info.charge_ctrl_end;
+ delta_soc = battmgr->info.charge_ctrl_end - start_soc;
+ }
+
+ mutex_lock(&battmgr->lock);
+ ret = qcom_battmgr_set_charge_control(battmgr, target_soc, delta_soc);
+ mutex_unlock(&battmgr->lock);
+ if (!ret) {
+ battmgr->info.charge_ctrl_start = start_soc;
+ battmgr->info.charge_ctrl_end = target_soc;
+ }
+
+ return 0;
+}
+
+static int qcom_battmgr_set_charge_end_threshold(struct qcom_battmgr *battmgr, int end_soc)
+{
+ u32 delta_soc = CHARGE_CTRL_DELTA_SOC;
+ int ret;
+
+ if (end_soc < CHARGE_CTRL_END_THR_MIN ||
+ end_soc > CHARGE_CTRL_END_THR_MAX) {
+ dev_err(battmgr->dev, "charge control end threshold exceed range: [%u - %u]\n",
+ CHARGE_CTRL_END_THR_MIN, CHARGE_CTRL_END_THR_MAX);
+ return -EINVAL;
+ }
+
+ if (battmgr->info.charge_ctrl_start && end_soc > battmgr->info.charge_ctrl_start)
+ delta_soc = end_soc - battmgr->info.charge_ctrl_start;
+
+ mutex_lock(&battmgr->lock);
+ ret = qcom_battmgr_set_charge_control(battmgr, end_soc, delta_soc);
+ mutex_unlock(&battmgr->lock);
+ if (!ret) {
+ battmgr->info.charge_ctrl_start = end_soc - delta_soc;
+ battmgr->info.charge_ctrl_end = end_soc;
+ }
+
+ return 0;
+}
+
+static int qcom_battmgr_charge_control_thresholds_init(struct qcom_battmgr *battmgr)
+{
+ int ret;
+ u8 en, end_soc, start_soc, delta_soc;
+
+ ret = nvmem_cell_read_u8(battmgr->dev->parent, "charge_limit_en", &en);
+ if (!ret && en != 0) {
+ ret = nvmem_cell_read_u8(battmgr->dev->parent, "charge_limit_end", &end_soc);
+ if (ret < 0)
+ return ret;
+
+ ret = nvmem_cell_read_u8(battmgr->dev->parent, "charge_limit_delta", &delta_soc);
+ if (ret < 0)
+ return ret;
+
+ if (delta_soc >= end_soc)
+ return -EINVAL;
+
+ start_soc = end_soc - delta_soc;
+ end_soc = clamp(end_soc, CHARGE_CTRL_END_THR_MIN, CHARGE_CTRL_END_THR_MAX);
+ start_soc = clamp(start_soc, CHARGE_CTRL_START_THR_MIN, CHARGE_CTRL_START_THR_MAX);
+
+ battmgr->info.charge_ctrl_start = start_soc;
+ battmgr->info.charge_ctrl_end = end_soc;
+ }
+
+ return 0;
+}
+
+static int qcom_battmgr_bat_is_writeable(struct power_supply *psy,
+ enum power_supply_property psp)
+{
+ switch (psp) {
+ case POWER_SUPPLY_PROP_CHARGE_CONTROL_START_THRESHOLD:
+ case POWER_SUPPLY_PROP_CHARGE_CONTROL_END_THRESHOLD:
+ return 1;
+ default:
+ return 0;
+ }
+
+ return 0;
+}
+
+static int qcom_battmgr_bat_set_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ const union power_supply_propval *pval)
+{
+ struct qcom_battmgr *battmgr = power_supply_get_drvdata(psy);
+
+ if (!battmgr->service_up)
+ return -EAGAIN;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_CHARGE_CONTROL_START_THRESHOLD:
+ return qcom_battmgr_set_charge_start_threshold(battmgr, pval->intval);
+ case POWER_SUPPLY_PROP_CHARGE_CONTROL_END_THRESHOLD:
+ return qcom_battmgr_set_charge_end_threshold(battmgr, pval->intval);
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
static const enum power_supply_property sc8280xp_bat_props[] = {
POWER_SUPPLY_PROP_STATUS,
POWER_SUPPLY_PROP_PRESENT,
@@ -659,6 +831,43 @@ static const struct power_supply_desc sc8280xp_bat_psy_desc = {
.get_property = qcom_battmgr_bat_get_property,
};
+static const enum power_supply_property x1e80100_bat_props[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_PRESENT,
+ POWER_SUPPLY_PROP_TECHNOLOGY,
+ POWER_SUPPLY_PROP_CYCLE_COUNT,
+ POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_POWER_NOW,
+ POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
+ POWER_SUPPLY_PROP_CHARGE_FULL,
+ POWER_SUPPLY_PROP_CHARGE_EMPTY,
+ POWER_SUPPLY_PROP_CHARGE_NOW,
+ POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN,
+ POWER_SUPPLY_PROP_ENERGY_FULL,
+ POWER_SUPPLY_PROP_ENERGY_EMPTY,
+ POWER_SUPPLY_PROP_ENERGY_NOW,
+ POWER_SUPPLY_PROP_TEMP,
+ POWER_SUPPLY_PROP_MANUFACTURE_YEAR,
+ POWER_SUPPLY_PROP_MANUFACTURE_MONTH,
+ POWER_SUPPLY_PROP_MANUFACTURE_DAY,
+ POWER_SUPPLY_PROP_MODEL_NAME,
+ POWER_SUPPLY_PROP_MANUFACTURER,
+ POWER_SUPPLY_PROP_SERIAL_NUMBER,
+ POWER_SUPPLY_PROP_CHARGE_CONTROL_START_THRESHOLD,
+ POWER_SUPPLY_PROP_CHARGE_CONTROL_END_THRESHOLD,
+};
+
+static const struct power_supply_desc x1e80100_bat_psy_desc = {
+ .name = "qcom-battmgr-bat",
+ .type = POWER_SUPPLY_TYPE_BATTERY,
+ .properties = x1e80100_bat_props,
+ .num_properties = ARRAY_SIZE(x1e80100_bat_props),
+ .get_property = qcom_battmgr_bat_get_property,
+ .set_property = qcom_battmgr_bat_set_property,
+ .property_is_writeable = qcom_battmgr_bat_is_writeable,
+};
+
static const enum power_supply_property sm8350_bat_props[] = {
POWER_SUPPLY_PROP_STATUS,
POWER_SUPPLY_PROP_HEALTH,
@@ -691,6 +900,42 @@ static const struct power_supply_desc sm8350_bat_psy_desc = {
.get_property = qcom_battmgr_bat_get_property,
};
+static const enum power_supply_property sm8550_bat_props[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_HEALTH,
+ POWER_SUPPLY_PROP_PRESENT,
+ POWER_SUPPLY_PROP_CHARGE_TYPE,
+ POWER_SUPPLY_PROP_CAPACITY,
+ POWER_SUPPLY_PROP_VOLTAGE_OCV,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_VOLTAGE_MAX,
+ POWER_SUPPLY_PROP_CURRENT_NOW,
+ POWER_SUPPLY_PROP_TEMP,
+ POWER_SUPPLY_PROP_TECHNOLOGY,
+ POWER_SUPPLY_PROP_CHARGE_COUNTER,
+ POWER_SUPPLY_PROP_CYCLE_COUNT,
+ POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
+ POWER_SUPPLY_PROP_CHARGE_FULL,
+ POWER_SUPPLY_PROP_MODEL_NAME,
+ POWER_SUPPLY_PROP_TIME_TO_FULL_AVG,
+ POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG,
+ POWER_SUPPLY_PROP_INTERNAL_RESISTANCE,
+ POWER_SUPPLY_PROP_STATE_OF_HEALTH,
+ POWER_SUPPLY_PROP_POWER_NOW,
+ POWER_SUPPLY_PROP_CHARGE_CONTROL_START_THRESHOLD,
+ POWER_SUPPLY_PROP_CHARGE_CONTROL_END_THRESHOLD,
+};
+
+static const struct power_supply_desc sm8550_bat_psy_desc = {
+ .name = "qcom-battmgr-bat",
+ .type = POWER_SUPPLY_TYPE_BATTERY,
+ .properties = sm8550_bat_props,
+ .num_properties = ARRAY_SIZE(sm8550_bat_props),
+ .get_property = qcom_battmgr_bat_get_property,
+ .set_property = qcom_battmgr_bat_set_property,
+ .property_is_writeable = qcom_battmgr_bat_is_writeable,
+};
+
static int qcom_battmgr_ac_get_property(struct power_supply *psy,
enum power_supply_property psp,
union power_supply_propval *val)
@@ -766,7 +1011,8 @@ static int qcom_battmgr_usb_get_property(struct power_supply *psy,
if (!battmgr->service_up)
return -EAGAIN;
- if (battmgr->variant == QCOM_BATTMGR_SC8280XP)
+ if (battmgr->variant == QCOM_BATTMGR_SC8280XP ||
+ battmgr->variant == QCOM_BATTMGR_X1E80100)
ret = qcom_battmgr_bat_sc8280xp_update(battmgr, psp);
else
ret = qcom_battmgr_usb_sm8350_update(battmgr, psp);
@@ -888,7 +1134,8 @@ static int qcom_battmgr_wls_get_property(struct power_supply *psy,
if (!battmgr->service_up)
return -EAGAIN;
- if (battmgr->variant == QCOM_BATTMGR_SC8280XP)
+ if (battmgr->variant == QCOM_BATTMGR_SC8280XP ||
+ battmgr->variant == QCOM_BATTMGR_X1E80100)
ret = qcom_battmgr_bat_sc8280xp_update(battmgr, psp);
else
ret = qcom_battmgr_wls_sm8350_update(battmgr, psp);
@@ -1085,6 +1332,9 @@ static void qcom_battmgr_sc8280xp_callback(struct qcom_battmgr *battmgr,
case BATTMGR_BAT_CHARGE_TIME:
battmgr->status.charge_time = le32_to_cpu(resp->time);
break;
+ case BATTMGR_CHG_CTRL_LIMIT_EN:
+ battmgr->error = 0;
+ break;
default:
dev_warn(battmgr->dev, "unknown message %#x\n", opcode);
break;
@@ -1198,6 +1448,12 @@ static void qcom_battmgr_sm8350_callback(struct qcom_battmgr *battmgr,
case BATT_POWER_NOW:
battmgr->status.power_now = le32_to_cpu(resp->intval.value);
break;
+ case BATT_CHG_CTRL_START_THR:
+ battmgr->info.charge_ctrl_start = le32_to_cpu(resp->intval.value);
+ break;
+ case BATT_CHG_CTRL_END_THR:
+ battmgr->info.charge_ctrl_end = le32_to_cpu(resp->intval.value);
+ break;
default:
dev_warn(battmgr->dev, "unknown property %#x\n", property);
break;
@@ -1280,6 +1536,7 @@ static void qcom_battmgr_sm8350_callback(struct qcom_battmgr *battmgr,
}
break;
case BATTMGR_REQUEST_NOTIFICATION:
+ case BATTMGR_CHG_CTRL_LIMIT_EN:
battmgr->error = 0;
break;
default:
@@ -1299,7 +1556,8 @@ static void qcom_battmgr_callback(const void *data, size_t len, void *priv)
if (opcode == BATTMGR_NOTIFICATION)
qcom_battmgr_notification(battmgr, data, len);
- else if (battmgr->variant == QCOM_BATTMGR_SC8280XP)
+ else if (battmgr->variant == QCOM_BATTMGR_SC8280XP ||
+ battmgr->variant == QCOM_BATTMGR_X1E80100)
qcom_battmgr_sc8280xp_callback(battmgr, data, len);
else
qcom_battmgr_sm8350_callback(battmgr, data, len);
@@ -1346,11 +1604,13 @@ static char *qcom_battmgr_battery[] = { "battery" };
static int qcom_battmgr_probe(struct auxiliary_device *adev,
const struct auxiliary_device_id *id)
{
+ const struct power_supply_desc *psy_desc;
struct power_supply_config psy_cfg_supply = {};
struct power_supply_config psy_cfg = {};
const struct of_device_id *match;
struct qcom_battmgr *battmgr;
struct device *dev = &adev->dev;
+ int ret;
battmgr = devm_kzalloc(dev, sizeof(*battmgr), GFP_KERNEL);
if (!battmgr)
@@ -1376,8 +1636,19 @@ static int qcom_battmgr_probe(struct auxiliary_device *adev,
else
battmgr->variant = QCOM_BATTMGR_SM8350;
- if (battmgr->variant == QCOM_BATTMGR_SC8280XP) {
- battmgr->bat_psy = devm_power_supply_register(dev, &sc8280xp_bat_psy_desc, &psy_cfg);
+ ret = qcom_battmgr_charge_control_thresholds_init(battmgr);
+ if (ret < 0)
+ return dev_err_probe(dev, ret,
+ "failed to init battery charge control thresholds\n");
+
+ if (battmgr->variant == QCOM_BATTMGR_SC8280XP ||
+ battmgr->variant == QCOM_BATTMGR_X1E80100) {
+ if (battmgr->variant == QCOM_BATTMGR_X1E80100)
+ psy_desc = &x1e80100_bat_psy_desc;
+ else
+ psy_desc = &sc8280xp_bat_psy_desc;
+
+ battmgr->bat_psy = devm_power_supply_register(dev, psy_desc, &psy_cfg);
if (IS_ERR(battmgr->bat_psy))
return dev_err_probe(dev, PTR_ERR(battmgr->bat_psy),
"failed to register battery power supply\n");
@@ -1397,7 +1668,12 @@ static int qcom_battmgr_probe(struct auxiliary_device *adev,
return dev_err_probe(dev, PTR_ERR(battmgr->wls_psy),
"failed to register wireless charing power supply\n");
} else {
- battmgr->bat_psy = devm_power_supply_register(dev, &sm8350_bat_psy_desc, &psy_cfg);
+ if (battmgr->variant == QCOM_BATTMGR_SM8550)
+ psy_desc = &sm8550_bat_psy_desc;
+ else
+ psy_desc = &sm8350_bat_psy_desc;
+
+ battmgr->bat_psy = devm_power_supply_register(dev, psy_desc, &psy_cfg);
if (IS_ERR(battmgr->bat_psy))
return dev_err_probe(dev, PTR_ERR(battmgr->bat_psy),
"failed to register battery power supply\n");
--
2.34.1
