From: Fenglin Wu <fenglin.wu@xxxxxxxxxxxxxxxx>
Add nvmem properties to retrieve charge control configurations
from the PMIC SDAM registers.
Signed-off-by: Fenglin Wu <fenglin.wu@xxxxxxxxxxxxxxxx>
---
.../devicetree/bindings/soc/qcom/qcom,pmic-glink.yaml | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,pmic-glink.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,pmic-glink.yaml
index 4c9e78f29523e3d77aacb4299f64ab96f9b1a831..9d6db4825da389aa14d77f653d2f8a3442e22162 100644
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,pmic-glink.yaml
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,pmic-glink.yaml
@@ -55,6 +55,20 @@ properties:
The array should contain a gpio entry for each PMIC Glink connector, in reg order.
It is defined that GPIO active level means "CC2" or Reversed/Flipped orientation.
+ nvmem-cells:
+ minItems: 3
+ maxItems: 3
+ description:
+ The nvmem cells contain the charge control settings, including the charge control
+ enable status, the battery state of charge (SoC) threshold for stopping charging,
+ and the battery SoC delta required to restart charging.
+
+ nvmem-cell-names:
+ items:
+ - const: charge_limit_en
+ - const: charge_limit_end
+ - const: charge_limit_delta
+
patternProperties:
'^connector@\d$':
$ref: /schemas/connector/usb-connector.yaml#
--
2.34.1
