On 9/3/25 3:58 PM, Dmitry Baryshkov wrote:
> On Wed, Sep 03, 2025 at 03:41:45PM +0200, Konrad Dybcio wrote:
>> On 9/3/25 1:58 PM, Dmitry Baryshkov wrote:
>>> From: Jessica Zhang <jessica.zhang@xxxxxxxxxxxxxxxx>
>>>
>>> Update Qualcomm DT files in order to declare extra stream pixel clocks
>>> and extra register resources used on these platforms to support
>>> DisplayPort MST.
>>>
>>> The driver will continue to work with the old DTS files as even after
>>> adding MST support the driver will have to support old DTS files which
>>> didn't have MST clocks.
>>>
>>> Signed-off-by: Jessica Zhang <jessica.zhang@xxxxxxxxxxxxxxxx>
>>> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxxxxxxxx>
>>> ---
>>
>> [...]
>>
>>> diff --git a/arch/arm64/boot/dts/qcom/sc8180x.dtsi b/arch/arm64/boot/dts/qcom/sc8180x.dtsi
>>> index 70c87c79e1325f4ab4c81f34e99c0b52be4b3810..e6a7248040095077d6f98d632f4e8a1868432445 100644
>>> --- a/arch/arm64/boot/dts/qcom/sc8180x.dtsi
>>> +++ b/arch/arm64/boot/dts/qcom/sc8180x.dtsi
>>> @@ -3241,16 +3241,20 @@ mdss_dp0: displayport-controller@ae90000 {
>>> <&dispcc DISP_CC_MDSS_DP_AUX_CLK>,
>>> <&dispcc DISP_CC_MDSS_DP_LINK_CLK>,
>>> <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>,
>>> - <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>;
>>> + <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>,
>>> + <&dispcc DISP_CC_MDSS_DP_PIXEL1_CLK>;
>>> clock-names = "core_iface",
>>> "core_aux",
>>> "ctrl_link",
>>> "ctrl_link_iface",
>>> - "stream_pixel";
>>> + "stream_pixel",
>>> + "stream_1_pixel";
>>>
>>> assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>,
>>> - <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
>>> + <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>,
>>> + <&dispcc DISP_CC_MDSS_DP_PIXEL1_CLK_SRC>;
>>> assigned-clock-parents = <&usb_prim_qmpphy QMP_USB43DP_DP_LINK_CLK>,
>>> + <&usb_prim_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
>>> <&usb_prim_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
>>>
>>> phys = <&usb_prim_qmpphy QMP_USB43DP_DP_PHY>;
>>> @@ -3319,16 +3323,20 @@ mdss_dp1: displayport-controller@ae98000 {
>>> <&dispcc DISP_CC_MDSS_DP_AUX1_CLK>,
>>> <&dispcc DISP_CC_MDSS_DP_LINK1_CLK>,
>>> <&dispcc DISP_CC_MDSS_DP_LINK1_INTF_CLK>,
>>> - <&dispcc DISP_CC_MDSS_DP_PIXEL2_CLK>;
>>> + <&dispcc DISP_CC_MDSS_DP_PIXEL2_CLK>,
>>> + <&dispcc DISP_CC_MDSS_DP_PIXEL1_CLK>;
>>> clock-names = "core_iface",
>>> "core_aux",
>>> "ctrl_link",
>>> "ctrl_link_iface",
>>> - "stream_pixel";
>>> + "stream_pixel",
>>> + "stream_1_pixel";
>>>
>>> assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK1_CLK_SRC>,
>>> - <&dispcc DISP_CC_MDSS_DP_PIXEL2_CLK_SRC>;
>>> + <&dispcc DISP_CC_MDSS_DP_PIXEL2_CLK_SRC>,
>>> + <&dispcc DISP_CC_MDSS_DP_PIXEL1_CLK_SRC>;
>>> assigned-clock-parents = <&usb_sec_qmpphy QMP_USB43DP_DP_LINK_CLK>,
>>> + <&usb_sec_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
>>> <&usb_sec_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
>>
>> Something's not right here
>
> No, it's correct as far as I understand. On this platform INTF3 / PIXEL1
> is shared between INTF0 / PIXEL and INTF4 / PIXEL2. So it is
> counterintuitive, but seems to be correct.
Eh, I unfortunately found confirmation for what you said. Hopefully this
doesn't cause too much extra pain on the driver side
Konrad
