On 9/3/25 1:47 PM, Wasim Nazir wrote:
> From: Sushrut Shree Trivedi <quic_sushruts@xxxxxxxxxxx>
>
> Enable PCIe0 and PCIe1 along with the respective phy-nodes.
>
> PCIe0 is routed to an m.2 E key connector on the mainboard for wifi
> attaches while PCIe1 routes to a standard PCIe x4 expansion slot.
>
> Signed-off-by: Sushrut Shree Trivedi <quic_sushruts@xxxxxxxxxxx>
> Signed-off-by: Wasim Nazir <wasim.nazir@xxxxxxxxxxxxxxxx>
> ---
> arch/arm64/boot/dts/qcom/lemans-evk.dts | 82 +++++++++++++++++++++++++++++++++
> 1 file changed, 82 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/lemans-evk.dts b/arch/arm64/boot/dts/qcom/lemans-evk.dts
> index 196c5ee0dd34..7528fa1c661a 100644
> --- a/arch/arm64/boot/dts/qcom/lemans-evk.dts
> +++ b/arch/arm64/boot/dts/qcom/lemans-evk.dts
> @@ -379,6 +379,40 @@ &mdss0_dp1_phy {
> status = "okay";
> };
>
> +&pcie0 {
> + perst-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
> + wake-gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&pcie0_default_state>;
property-n
property-names
in this order, please
Konrad
