From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
The CCI hosts have both frequency and voltage requirements (which
happen to be common across instances on a given SoC, at least so far).
Express them by introducing an OPP table and linking it to the hosts.
Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
index 18b5cb441f955f7a91204376e05536b203f3e28b..c396186317d49f411d7162771a358563329a02a4 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
@@ -391,6 +391,15 @@ memory@80000000 {
reg = <0x0 0x80000000 0x0 0x0>;
};
+ cci_opp_table: opp-table-cci {
+ compatible = "operating-points-v2";
+
+ opp-37500000 {
+ opp-hz = /bits/ 64 <37500000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+ };
+
cpu0_opp_table: opp-table-cpu0 {
compatible = "operating-points-v2";
opp-shared;
@@ -4181,6 +4190,7 @@ cci0: cci@ac4a000 {
"cpas_ahb",
"cci";
+ operating-points-v2 = <&cci_opp_table>;
power-domains = <&camcc TITAN_TOP_GDSC>;
pinctrl-0 = <&cci0_default>;
@@ -4222,6 +4232,7 @@ cci1: cci@ac4b000 {
"cpas_ahb",
"cci";
+ operating-points-v2 = <&cci_opp_table>;
power-domains = <&camcc TITAN_TOP_GDSC>;
pinctrl-0 = <&cci1_default>;
@@ -4262,6 +4273,8 @@ cci2: cci@ac4c000 {
"slow_ahb_src",
"cpas_ahb",
"cci";
+
+ operating-points-v2 = <&cci_opp_table>;
power-domains = <&camcc TITAN_TOP_GDSC>;
pinctrl-0 = <&cci2_default>;
@@ -4303,6 +4316,7 @@ cci3: cci@ac4d000 {
"cpas_ahb",
"cci";
+ operating-points-v2 = <&cci_opp_table>;
power-domains = <&camcc TITAN_TOP_GDSC>;
pinctrl-0 = <&cci3_default>;
--
2.51.0
