From: Sushrut Shree Trivedi <quic_sushruts@xxxxxxxxxxx>
Enable PCIe0 and PCIe1 along with the respective phy-nodes.
PCIe0 is routed to an m.2 E key connector on the mainboard for wifi
attaches while PCIe1 routes to a standard PCIe x4 expansion slot.
Signed-off-by: Sushrut Shree Trivedi <quic_sushruts@xxxxxxxxxxx>
Signed-off-by: Wasim Nazir <wasim.nazir@xxxxxxxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/lemans-evk.dts | 82 +++++++++++++++++++++++++++++++++
1 file changed, 82 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/lemans-evk.dts b/arch/arm64/boot/dts/qcom/lemans-evk.dts
index 30c3e5bead07..17ba3ee99494 100644
--- a/arch/arm64/boot/dts/qcom/lemans-evk.dts
+++ b/arch/arm64/boot/dts/qcom/lemans-evk.dts
@@ -379,6 +379,40 @@ &mdss0_dp1_phy {
status = "okay";
};
+&pcie0 {
+ perst-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
+ wake-gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
+
+ pinctrl-0 = <&pcie0_default_state>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&pcie0_phy {
+ vdda-phy-supply = <&vreg_l5a>;
+ vdda-pll-supply = <&vreg_l1c>;
+
+ status = "okay";
+};
+
+&pcie1 {
+ perst-gpios = <&tlmm 4 GPIO_ACTIVE_LOW>;
+ wake-gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>;
+
+ pinctrl-0 = <&pcie1_default_state>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&pcie1_phy {
+ vdda-phy-supply = <&vreg_l5a>;
+ vdda-pll-supply = <&vreg_l1c>;
+
+ status = "okay";
+};
+
&qupv3_id_0 {
status = "okay";
};
@@ -395,6 +429,54 @@ &sleep_clk {
clock-frequency = <32768>;
};
+&tlmm {
+ pcie0_default_state: pcie0-default-state {
+ clkreq-pins {
+ pins = "gpio1";
+ function = "pcie0_clkreq";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ perst-pins {
+ pins = "gpio2";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ wake-pins {
+ pins = "gpio0";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ pcie1_default_state: pcie1-default-state {
+ clkreq-pins {
+ pins = "gpio3";
+ function = "pcie1_clkreq";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ perst-pins {
+ pins = "gpio4";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ wake-pins {
+ pins = "gpio5";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+};
+
&uart10 {
compatible = "qcom,geni-debug-uart";
pinctrl-0 = <&qup_uart10_default>;
--
2.51.0
