Re: [PATCH v4 4/4] arm64: dts: qcom: monaco-evk: Add sound card

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sat, Sep 06, 2025 at 10:26:23PM +0300, Dmitry Baryshkov wrote:
> On Sat, Sep 06, 2025 at 12:53:50AM +0530, Umang Chheda wrote:
> > From: Mohammad Rafi Shaik <mohammad.rafi.shaik@xxxxxxxxxxxxxxxx>
> > 
> > Add the sound card for monaco-evk board and verified playback
> > functionality using the max98357a I2S speaker amplifier and I2S
> > microphones. The max98357a speaker amplifier is connected via
> > High-Speed MI2S HS0 interface, while the microphones utilize the
> > Secondary MI2S interface and also enable required pin controller
> > gpios for audio.
> > 
> > Signed-off-by: Mohammad Rafi Shaik <mohammad.rafi.shaik@xxxxxxxxxxxxxxxx>
> > Signed-off-by: Umang Chheda <umang.chheda@xxxxxxxxxxxxxxxx>
> > ---
> >  arch/arm64/boot/dts/qcom/monaco-evk.dts | 52 +++++++++++++++++++++++++
> >  arch/arm64/boot/dts/qcom/qcs8300.dtsi   | 37 ++++++++++++++++++
> >  2 files changed, 89 insertions(+)
> > 
> > diff --git a/arch/arm64/boot/dts/qcom/monaco-evk.dts b/arch/arm64/boot/dts/qcom/monaco-evk.dts
> > index 93e9e5322a39..f3c5d363921e 100644
> > --- a/arch/arm64/boot/dts/qcom/monaco-evk.dts
> > +++ b/arch/arm64/boot/dts/qcom/monaco-evk.dts
> > @@ -6,6 +6,7 @@
> >  /dts-v1/;
> > 
> >  #include <dt-bindings/gpio/gpio.h>
> > +#include <dt-bindings/sound/qcom,q6afe.h>
> >  #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
> > 
> >  #include "qcs8300.dtsi"
> > @@ -24,6 +25,57 @@ aliases {
> >  	chosen {
> >  		stdout-path = "serial0:115200n8";
> >  	};
> > +
> > +	dmic: audio-codec-0 {
> > +		compatible = "dmic-codec";
> > +		#sound-dai-cells = <0>;
> > +		num-channels = <1>;
> > +	};
> > +
> > +	max98357a: audio-codec-1 {
> > +		compatible = "maxim,max98357a";
> > +		#sound-dai-cells = <0>;
> > +	};
> > +
> > +	sound {
> > +		compatible = "qcom,qcs8275-sndcard";
> 
> qcs8300
> 

If the Monaco EVK actually is QCS8300... But, I presume qcs8275 and
qcs8300 are identical when it comes to sound?

@Mohammad, if this is the case can't we just support the
qcom,monaco-sndcard instead to avoid this confusion?

Regards,
Bjorn

> > +		model = "MONACO-EVK";
> > +
> 
> -- 
> With best wishes
> Dmitry




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux