Enable IMX577 via CCI1 on LeMans EVK Core Kit.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@xxxxxxxxxx>
Signed-off-by: Wenmeng Liu <quic_wenmliu@xxxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/Makefile | 4 +
arch/arm64/boot/dts/qcom/lemans-evk-camera.dtso | 101 ++++++++++++++++++++++++
2 files changed, 105 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 0a7c308dec365263bbb7aa5f5cd306dbeacfd3f1..500733ec00ee10e7c83a2c2c6d2bdc1ce0519773 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -30,6 +30,10 @@ dtb-$(CONFIG_ARCH_QCOM) += ipq9574-rdp449.dtb
dtb-$(CONFIG_ARCH_QCOM) += ipq9574-rdp453.dtb
dtb-$(CONFIG_ARCH_QCOM) += ipq9574-rdp454.dtb
dtb-$(CONFIG_ARCH_QCOM) += lemans-evk.dtb
+
+lemans-evk-camera-dtbs := lemans-evk.dtb lemans-evk-camera.dtbo
+
+dtb-$(CONFIG_ARCH_QCOM) += lemans-evk-camera.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8216-samsung-fortuna3g.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8916-acer-a1-724.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8916-alcatel-idol347.dtb
diff --git a/arch/arm64/boot/dts/qcom/lemans-evk-camera.dtso b/arch/arm64/boot/dts/qcom/lemans-evk-camera.dtso
new file mode 100644
index 0000000000000000000000000000000000000000..629992ced9b13b23505fc20562929a0ed17a9566
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/lemans-evk-camera.dtso
@@ -0,0 +1,101 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2024-2025 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/*
+ * Camera Sensor overlay on top of LeMans EVK Core Kit.
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/clock/qcom,sa8775p-camcc.h>
+#include <dt-bindings/gpio/gpio.h>
+
+&{/} {
+ vreg_cam1_1p8: vreg_cam1_1p8 {
+ compatible = "regulator-fixed";
+ regulator-name = "vreg_cam1_1p8";
+ startup-delay-us = <10000>;
+ enable-active-high;
+ gpio = <&pmm8654au_0_gpios 8 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&camss {
+ vdda-pll-supply = <&vreg_l1c>;
+ vdda-phy-supply = <&vreg_l4a>;
+
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ reg = <1>;
+
+ csiphy1_ep: endpoint {
+ clock-lanes = <7>;
+ data-lanes = <0 1 2 3>;
+ remote-endpoint = <&imx577_ep1>;
+ };
+ };
+ };
+};
+
+&cci1 {
+ pinctrl-0 = <&cci1_0_default>;
+ pinctrl-1 = <&cci1_0_sleep>;
+
+ status = "okay";
+};
+
+&cci1_i2c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ camera@1a {
+ compatible = "sony,imx577";
+ reg = <0x1a>;
+
+ reset-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>;
+ pinctrl-0 = <&cam1_default>;
+ pinctrl-names = "default";
+
+ clocks = <&camcc CAM_CC_MCLK1_CLK>;
+ assigned-clocks = <&camcc CAM_CC_MCLK1_CLK>;
+ assigned-clock-rates = <24000000>;
+
+ dovdd-supply = <&vreg_s4a>;
+ avdd-supply = <&vreg_cam1_1p8>;
+
+ port {
+ imx577_ep1: endpoint {
+ clock-lanes = <7>;
+ link-frequencies = /bits/ 64 <600000000>;
+ data-lanes = <0 1 2 3>;
+ remote-endpoint = <&csiphy1_ep>;
+ };
+ };
+ };
+};
+
+&tlmm {
+ cam1_default: cam1-default-state {
+ mclk-pins {
+ pins = "gpio73";
+ function = "cam_mclk";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ rst-pins {
+ pins = "gpio133";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+};
--
2.34.1
