On Wed Aug 13, 2025 at 4:58 PM BST, Stephan Gerhold wrote: > Currently, the macro audio codecs are enabled by default in x1e80100.dtsi. > However, they do not probe without the ADSP remoteproc, which is disabled > by default. Also, not all boards make use of all the audio codecs, e.g. > there are several boards with just two speakers. In this case, the > &lpass_wsa2macro is not used. > > Disable the audio codecs by default in x1e80100.dtsi and enable only the > used macros for each device. > > Signed-off-by: Stephan Gerhold <stephan.gerhold@xxxxxxxxxx> > --- > Stephan Gerhold (9): > arm64: dts: qcom: x1-asus-zenbook-a14: Explicitly enable used audio codecs > arm64: dts: qcom: x1-crd: Explicitly enable used audio codecs > arm64: dts: qcom: x1e001de-devkit: Explicitly enable used audio codecs > arm64: dts: qcom: x1e78100-lenovo-thinkpad-t14s: Explicitly enable used audio codecs > arm64: dts: qcom: x1e80100-hp-omnibook-x14: Explicitly enable used audio codecs > arm64: dts: qcom: x1e80100-lenovo-yoga-slim7x: Explicitly enable used audio codecs > arm64: dts: qcom: x1e80100-microsoft-romulus: Explicitly enable used audio codecs > arm64: dts: qcom: x1e80100-qcp: Explicitly enable used audio codecs The subject or title is a bit confusing. "Disable audio codecs" and bunch of enable commits. Maybe "Move audio codecs enablement out of .dtsi into whatever"? > arm64: dts: qcom: x1e80100: Disable audio codecs by default Best regards, Alexey
