Add DeviceTree binding for Glymur SoC TLMM block Signed-off-by: Pankaj Patil <pankaj.patil@xxxxxxxxxxxxxxxx> --- Changes in v5: Rebased on top of v6.17-rc1 Updated RESOUT_GPIO_N function in enum to lowercase Changes in v4: Updated enum in bindings to line length of 80 char Changes in v3: Fixed indentation for example tlmm node Changes in v2: Updated gpio-line-names maxItems to 250 Fixed example node reg property .../bindings/pinctrl/qcom,glymur-tlmm.yaml | 133 ++++++++++++++++++ 1 file changed, 133 insertions(+) create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,glymur-tlmm.yaml diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,glymur-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,glymur-tlmm.yaml new file mode 100644 index 000000000000..daa5e94fc3fd --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,glymur-tlmm.yaml @@ -0,0 +1,133 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,glymur-tlmm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. Glymur TLMM block + +maintainers: + - Bjorn Andersson <bjorn.andersson@xxxxxxxxxxxxxxxx> + +description: + Top Level Mode Multiplexer pin controller in Qualcomm Glymur SoC. + +allOf: + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# + +properties: + compatible: + const: qcom,glymur-tlmm + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + gpio-reserved-ranges: + minItems: 1 + maxItems: 119 + + gpio-line-names: + maxItems: 250 + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-glymur-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-glymur-tlmm-state" + additionalProperties: false + +$defs: + qcom-glymur-tlmm-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + oneOf: + - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9])$" + - enum: [ ufs_reset, sdc2_clk, sdc2_cmd, sdc2_data ] + minItems: 1 + maxItems: 36 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + enum: [ gpio, resout_gpio_n, aoss_cti, asc_cci, atest_char, atest_usb, + audio_ext_mclk0, audio_ext_mclk1, audio_ref_clk, cam_asc_mclk4, + cam_mclk, cci_async_in, cci_i2c_scl, cci_i2c_sda, cci_timer, + cmu_rng, cri_trng, dbg_out_clk, ddr_bist_complete, + ddr_bist_fail, ddr_bist_start, ddr_bist_stop, ddr_pxi, + edp0_hot, edp0_lcd, edp1_lcd, egpio, eusb0_ac_en, eusb1_ac_en, + eusb2_ac_en, eusb3_ac_en, eusb5_ac_en, eusb6_ac_en, gcc_gp1, + gcc_gp2, gcc_gp3, host2wlan_sol, i2c0_s_scl, i2c0_s_sda, + i2s0_data, i2s0_sck, i2s0_ws, i2s1_data, i2s1_sck, i2s1_ws, + ibi_i3c, jitter_bist, mdp_vsync_out, mdp_vsync_e, mdp_vsync_p, + mdp_vsync_s, pcie3a_clk, pcie3a_rst_n, pcie3b_clk, + pcie4_clk_req_n, pcie5_clk_req_n, pcie6_clk_req_n, phase_flag, + pll_bist_sync, pll_clk_aux, pmc_oca_n, pmc_uva_n, prng_rosc, + qdss_cti, qdss_gpio, qspi, qup0_se0, qup0_se1, qup0_se2, + qup0_se3_l0, qup0_se3, qup0_se4, qup0_se5, qup0_se6, qup0_se7, + qup1_se0, qup1_se1, qup1_se2, qup1_se3, qup1_se4, qup1_se5, + qup1_se6, qup1_se7, qup2_se0, qup2_se1, qup2_se2, qup2_se3, + qup2_se4, qup2_se5, qup2_se6, qup2_se7, qup3_se0, qup3_se1, + sd_write_protect, sdc4_clk, sdc4_cmd, sdc4_data, smb_acok_n, + sys_throttle, tb_trig_sdc2, tb_trig_sdc4, tmess_prng, + tsense_pwm, tsense_therm, usb0_dp, usb0_phy_ps, usb0_sbrx, + usb0_sbtx, usb0_tmu, usb1_dbg, usb1_dp, usb1_phy_ps, usb1_sbrx, + usb1_sbtx, usb1_tmu, usb2_dp, usb2_phy_ps, usb2_sbrx, usb2_sbtx, + usb2_tmu, vsense_trigger_mirnat, wcn_sw, wcn_sw_ctrl ] + + required: + - pins + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + tlmm: pinctrl@f100000 { + compatible = "qcom,glymur-tlmm"; + reg = <0x0f100000 0xf00000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&tlmm 0 0 249>; + wakeup-parent = <&pdc>; + gpio-reserved-ranges = <4 4>, <10 2>, <33 3>, <44 4>; + qup_uart21_default: qup-uart21-default-state { + tx-pins { + pins = "gpio86"; + function = "qup2_se5"; + drive-strength = <2>; + bias-disable; + }; + + rx-pins { + pins = "gpio87"; + function = "qup2_se5"; + drive-strength = <2>; + bias-disable; + }; + }; + }; +... -- 2.34.1
