Hi everyone,
Here's V10 of the phy_port series. This version doesn't contain any
significant change, it fixes the conflict on the qualcom PHY driver, as
well as aggregates the reviews from Rob, Köry and Christophe (thanks
again).
As a remainder, a few important notes :
- This is only a first phase. It instantiates the port, and leverage
that to make the MAC <-> PHY <-> SFP usecase simpler.
- Next phase will deal with controlling the port state, as well as the
netlink uAPI for that.
- The end-goal is to enable support for complex port MUX. This
preliminary work focuses on PHY-driven ports, but this will be
extended to support muxing at the MII level (Multi-phy, or compo PHY
+ SFP as found on Turris Omnia for example).
- The naming is definitely not set in stone. I named that "phy_port",
but this may convey the false sense that this is phylib-specific.
Even the word "port" is not that great, as it already has several
different meanings in the net world (switch port, devlink port,
etc.). I used the term "connector" in the binding.
A bit of history on that work :
The end goal that I personnaly want to achieve is :
+ PHY - RJ45
|
MAC - MUX -+ PHY - RJ45
After many discussions here on netdev@, but also at netdevconf[1] and
LPC[2], there appears to be several analoguous designs that exist out
there.
[1] : https://netdevconf.info/0x17/sessions/talk/improving-multi-phy-and-multi-port-interfaces.html
[2] : https://lpc.events/event/18/contributions/1964/ (video isn't the
right one)
Take the MAchiatobin, it has 2 interfaces that looks like this :
MAC - PHY -+ RJ45
|
+ SFP - Whatever the module does
Now, looking at the Turris Omnia, we have :
MAC - MUX -+ PHY - RJ45
|
+ SFP - Whatever the module does
We can find more example of this kind of designs, the common part is
that we expose multiple front-facing media ports. This is what this
current work aims at supporting. As of right now, it does'nt add any
support for muxing, but this will come later on.
This first phase focuses on phy-driven ports only, but there are already
quite some challenges already. For one, we can't really autodetect how
many ports are sitting behind a PHY. That's why this series introduces a
new binding. Describing ports in DT should however be a last-resort
thing when we need to clear some ambiguity about the PHY media-side.
The only use-cases that we have today for multi-port PHYs are combo PHYs
that drive both a Copper port and an SFP (the Macchiatobin case). This
in itself is challenging and this series only addresses part of this
support, by registering a phy_port for the PHY <-> SFP connection. The
SFP module should in the end be considered as a port as well, but that's
not yet the case.
However, because now PHYs can register phy_ports for every media-side
interface they have, they can register the capabilities of their ports,
which allows making the PHY-driver SFP case much more generic.
Let me know what you think, I'm all in for discussions :)
Regards,
Changes in V10:
- Rebase on net-next
- Fix a typo reported by Köry
- Aggregate all reviews
- Fix the conflict on the qcom driver
Changes in V9:
- Removed maxItems and items from the connector binding
- Fixed a typo in the binding
Changes in V8:
- Added maxItems on the connector media binding
- Made sure we parse a single medium
- Added a missing bitwise macro
Changes in V7:
- Move ethtool_medium_get_supported to phy_caps
- support combo-ports, each with a given set of supported modes
- Introduce the notion of 'not-described' ports
Changes in V6:
- Fixed kdoc on patch 3
- Addressed a missing port-ops registration for the Marvell 88x2222
driver
- Addressed a warning reported by Simon on the DP83822 when building
without CONFIG_OF_MDIO
Changes in V5 :
- renamed the bindings to use the term "connector" instead of "port"
- Rebased, and fixed some issues reported on the 83822 driver
- Use phy_caps
Changes in V4 :
- Introduced a kernel doc
- Reworked the mediums definitions in patch 2
- QCA807x now uses the generic SFP support
- Fixed some implementation bugs to build the support list based on the
interfaces supported on a port
V9: https://lore.kernel.org/netdev/20250717073020.154010-1-maxime.chevallier@xxxxxxxxxxx/
V8: https://lore.kernel.org/netdev/20250710134533.596123-1-maxime.chevallier@xxxxxxxxxxx/
v7: https://lore.kernel.org/netdev/20250630143315.250879-1-maxime.chevallier@xxxxxxxxxxx/
V6: https://lore.kernel.org/netdev/20250507135331.76021-1-maxime.chevallier@xxxxxxxxxxx/
V5: https://lore.kernel.org/netdev/20250425141511.182537-1-maxime.chevallier@xxxxxxxxxxx/
V4: https://lore.kernel.org/netdev/20250213101606.1154014-1-maxime.chevallier@xxxxxxxxxxx/
V3: https://lore.kernel.org/netdev/20250207223634.600218-1-maxime.chevallier@xxxxxxxxxxx/
RFC V2: https://lore.kernel.org/netdev/20250122174252.82730-1-maxime.chevallier@xxxxxxxxxxx/
RFC V1: https://lore.kernel.org/netdev/20241220201506.2791940-1-maxime.chevallier@xxxxxxxxxxx/
Maxime
Maxime Chevallier (15):
dt-bindings: net: Introduce the ethernet-connector description
net: ethtool: common: Indicate that BaseT works on up to 4 lanes
net: ethtool: Introduce ETHTOOL_LINK_MEDIUM_* values
net: phy: Introduce PHY ports representation
net: phy: dp83822: Add support for phy_port representation
net: phy: Create a phy_port for PHY-driven SFPs
net: phy: Introduce generic SFP handling for PHY drivers
net: phy: marvell-88x2222: Support SFP through phy_port interface
net: phy: marvell: Support SFP through phy_port interface
net: phy: marvell10g: Support SFP through phy_port
net: phy: at803x: Support SFP through phy_port interface
net: phy: qca807x: Support SFP through phy_port interface
net: phy: Only rely on phy_port for PHY-driven SFP
net: phy: dp83822: Add SFP support through the phy_port interface
Documentation: networking: Document the phy_port infrastructure
.../bindings/net/ethernet-connector.yaml | 45 +++
.../devicetree/bindings/net/ethernet-phy.yaml | 18 +
Documentation/networking/index.rst | 1 +
Documentation/networking/phy-port.rst | 111 ++++++
MAINTAINERS | 3 +
drivers/net/phy/Makefile | 2 +-
drivers/net/phy/dp83822.c | 78 +++--
drivers/net/phy/marvell-88x2222.c | 98 +++---
drivers/net/phy/marvell.c | 100 +++---
drivers/net/phy/marvell10g.c | 47 +--
drivers/net/phy/phy-caps.h | 5 +
drivers/net/phy/phy_caps.c | 58 ++++
drivers/net/phy/phy_device.c | 327 +++++++++++++++++-
drivers/net/phy/phy_port.c | 170 +++++++++
drivers/net/phy/qcom/at803x.c | 64 +---
drivers/net/phy/qcom/qca807x.c | 75 ++--
include/linux/ethtool.h | 44 ++-
include/linux/phy.h | 38 +-
include/linux/phy_port.h | 97 ++++++
include/uapi/linux/ethtool.h | 20 ++
net/ethtool/common.c | 267 ++++++++------
21 files changed, 1279 insertions(+), 389 deletions(-)
create mode 100644 Documentation/devicetree/bindings/net/ethernet-connector.yaml
create mode 100644 Documentation/networking/phy-port.rst
create mode 100644 drivers/net/phy/phy_port.c
create mode 100644 include/linux/phy_port.h
--
2.49.0
