Add pmic,id = m rpmh to regulator definitions. This regulator set provides
vreg_l3m_1p8 the regulator for the ov08x40 RGB sensor on the CRD.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/x1-crd.dtsi | 30 ++++++++++++++++++++++++++++++
1 file changed, 30 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/x1-crd.dtsi b/arch/arm64/boot/dts/qcom/x1-crd.dtsi
index db87b9b5be63d4fabf5ced20b23080a1a49b1207..08268f60c305cd69baf937fced6d37f2ea788b62 100644
--- a/arch/arm64/boot/dts/qcom/x1-crd.dtsi
+++ b/arch/arm64/boot/dts/qcom/x1-crd.dtsi
@@ -960,6 +960,36 @@ vreg_l3j_0p8: ldo3 {
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
};
+
+ regulators-8 {
+ compatible = "qcom,pm8010-rpmh-regulators";
+ qcom,pmic-id = "m";
+
+ vdd-l1-l2-supply = <&vreg_s5j_1p2>;
+ vdd-l3-l4-supply = <&vreg_s4c_1p8>;
+ vdd-l7-supply = <&vreg_bob1>;
+
+ vreg_l3m_1p8: ldo3 {
+ regulator-name = "vreg_l3m_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1808000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l4m_1p8: ldo4 {
+ regulator-name = "vrer_l4m_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1808000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l7m_2p9: ldo7 {
+ regulator-name = "vreg_l7m_2p9";
+ regulator-min-microvolt = <2912000>;
+ regulator-max-microvolt = <2912000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
};
&gpu {
--
2.49.0
