On Wed, Jun 25, 2025 at 04:58:12PM -0500, Mario Limonciello wrote: > From: Mario Limonciello <mario.limonciello@xxxxxxx> > > Programming a hardware debounce of 50ms causes problems where a button > doesn't work properly anymore on some systems. This debounce is intended > for compatibility with systems with a mechanical switch so soc_button_array > devices should only be using a sofware debounce. > > Add support for indicating that a driver is only requesting gpio_keys > to use software debounce support and mark that in soc_button_array > accordingly. ... > + gpio_keys_pdata->no_hw_debounce = TRUE; true -- With Best Regards, Andy Shevchenko
