On 9/12/2025 5:23 AM, Benjamin Block wrote:
On Thu, Sep 11, 2025 at 11:33:00AM -0700, Farhan Ali wrote:On s390 systems, which use a machine level hypervisor, PCI devices are always accessed through a form of PCI pass-through which fundamentally operates on a per PCI function granularity. This is also reflected in the s390 PCI hotplug driver which creates hotplug slots for individual PCI functions. Its reset_slot() function, which is a wrapper for zpci_hot_reset_device(), thus also resets individual functions. Currently, the kernel's PCI_SLOT() macro assigns the same pci_slot object to multifunction devices. This approach worked fine on s390 systems that only exposed virtual functions as individual PCI domains to the operating system. Since commit 44510d6fa0c0 ("s390/pci: Handling multifunctions") s390 supports exposing the topology of multifunction PCI devices by grouping them in a shared PCI domain. When attempting to reset a function through the hotplug driver, the shared slot assignment causes the wrong function to be reset instead of the intended one. It also leaks memory as we do create a pci_slot object for the function, but don't correctly free it in pci_slot_release(). Add a flag for struct pci_slot to allow per function PCI slots for functions managed through a hypervisor, which exposes individual PCI functions while retaining the topology. Fixes: 44510d6fa0c0 ("s390/pci: Handling multifunctions")Stable tag? Reseting the wrong PCI function sounds bad enough.
That's a fair point. This is definitely broken for NETD devices (https://www.ibm.com/docs/en/linux-on-systems?topic=express-direct-mode). Will cc stable.
Thanks Farhan
