[PATCH kvmtool v3 2/6] arm64: Initial nested virt support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The ARMv8.3 architecture update includes support for nested
virtualization. Allow the user to specify "--nested" to start a guest in
(virtual) EL2 instead of EL1.
This will also change the PSCI conduit from HVC to SMC in the device
tree.

Signed-off-by: Andre Przywara <andre.przywara@xxxxxxx>
---
 arm64/fdt.c                         |  5 ++++-
 arm64/include/kvm/kvm-config-arch.h |  5 ++++-
 arm64/kvm-cpu.c                     | 12 +++++++++++-
 3 files changed, 19 insertions(+), 3 deletions(-)

diff --git a/arm64/fdt.c b/arm64/fdt.c
index df7775876..98f1dd9d4 100644
--- a/arm64/fdt.c
+++ b/arm64/fdt.c
@@ -205,7 +205,10 @@ static int setup_fdt(struct kvm *kvm)
 		_FDT(fdt_property_string(fdt, "compatible", "arm,psci"));
 		fns = &psci_0_1_fns;
 	}
-	_FDT(fdt_property_string(fdt, "method", "hvc"));
+	if (kvm->cfg.arch.nested_virt)
+		_FDT(fdt_property_string(fdt, "method", "smc"));
+	else
+		_FDT(fdt_property_string(fdt, "method", "hvc"));
 	_FDT(fdt_property_cell(fdt, "cpu_suspend", fns->cpu_suspend));
 	_FDT(fdt_property_cell(fdt, "cpu_off", fns->cpu_off));
 	_FDT(fdt_property_cell(fdt, "cpu_on", fns->cpu_on));
diff --git a/arm64/include/kvm/kvm-config-arch.h b/arm64/include/kvm/kvm-config-arch.h
index ee031f010..a1dac28e6 100644
--- a/arm64/include/kvm/kvm-config-arch.h
+++ b/arm64/include/kvm/kvm-config-arch.h
@@ -10,6 +10,7 @@ struct kvm_config_arch {
 	bool		aarch32_guest;
 	bool		has_pmuv3;
 	bool		mte_disabled;
+	bool		nested_virt;
 	u64		kaslr_seed;
 	enum irqchip_type irqchip;
 	u64		fw_addr;
@@ -57,6 +58,8 @@ int sve_vl_parser(const struct option *opt, const char *arg, int unset);
 		     "Type of interrupt controller to emulate in the guest",	\
 		     irqchip_parser, NULL),					\
 	OPT_U64('\0', "firmware-address", &(cfg)->fw_addr,			\
-		"Address where firmware should be loaded"),
+		"Address where firmware should be loaded"),			\
+	OPT_BOOLEAN('\0', "nested", &(cfg)->nested_virt,			\
+		    "Start VCPUs in EL2 (for nested virt)"),
 
 #endif /* ARM_COMMON__KVM_CONFIG_ARCH_H */
diff --git a/arm64/kvm-cpu.c b/arm64/kvm-cpu.c
index 94c08a4d7..42dc11dad 100644
--- a/arm64/kvm-cpu.c
+++ b/arm64/kvm-cpu.c
@@ -71,6 +71,12 @@ static void kvm_cpu__select_features(struct kvm *kvm, struct kvm_vcpu_init *init
 	/* Enable SVE if available */
 	if (kvm__supports_extension(kvm, KVM_CAP_ARM_SVE))
 		init->features[0] |= 1UL << KVM_ARM_VCPU_SVE;
+
+	if (kvm->cfg.arch.nested_virt) {
+		if (!kvm__supports_extension(kvm, KVM_CAP_ARM_EL2))
+			die("EL2 (nested virt) is not supported");
+		init->features[0] |= 1UL << KVM_ARM_VCPU_HAS_EL2;
+	}
 }
 
 static int vcpu_configure_sve(struct kvm_cpu *vcpu)
@@ -313,7 +319,11 @@ static void reset_vcpu_aarch64(struct kvm_cpu *vcpu)
 	reg.addr = (u64)&data;
 
 	/* pstate = all interrupts masked */
-	data	= PSR_D_BIT | PSR_A_BIT | PSR_I_BIT | PSR_F_BIT | PSR_MODE_EL1h;
+	data	= PSR_D_BIT | PSR_A_BIT | PSR_I_BIT | PSR_F_BIT;
+	if (vcpu->kvm->cfg.arch.nested_virt)
+		data |= PSR_MODE_EL2h;
+	else
+		data |= PSR_MODE_EL1h;
 	reg.id	= ARM64_CORE_REG(regs.pstate);
 	if (ioctl(vcpu->vcpu_fd, KVM_SET_ONE_REG, &reg) < 0)
 		die_perror("KVM_SET_ONE_REG failed (spsr[EL1])");
-- 
2.25.1





[Index of Archives]     [KVM ARM]     [KVM ia64]     [KVM ppc]     [Virtualization Tools]     [Spice Development]     [Libvirt]     [Libvirt Users]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite Questions]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux