Re: [PATCH v5 0/6] meson: add corresponding target for Makefile's hdr-check

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Karthik

This looks good, I've left a couple of comments but I don't think there is anything that necessitates a re-roll.

Thanks

Phillip

On 23/04/2025 09:15, Karthik Nayak wrote:
To bridge the remaining gaps between Makefile and Meson, this patch
series adds 'hdr-check' to Meson to compliment the Makefile's
'hdr-check'.

We also introduce 'headers-check' as an alias to 'hdr-check' as a better
named replacement in both Meson and make and add a note to deprecate
'hdr-check' in the future.

The first two commits are small cleanups, where we re-organize existing
variables to make it easier to add the target. The third commit adds the
'hdr-check' target to Meson. The last commit introduces the
'headers-check' alias to both Meson and the makefile and marks
'hdr-check' to be deprecated.

This is based on master 9d22ac5122 (The third batch, 2025-04-07) with
'es/meson-build-skip-coccinelle' merged in.

---
Changes in v5:
- Add a commit to install 'git' in GitHub's CI before the repository is
   checked out. Without the presence of the 'git' executable, GitHub
   downloads a tar of the repo instead of cloning it. This causes the
   patch series to fail in CI.
- Expose the 'headers_to_check' variable even if 'git' executable is not
   found or not a repository. This ensures dependencies of
   'headers_to_check' can simply rely on its length. We also check that
   the '.git' folder is setup before populating 'headers_to_check', this
   ensures Meson doesn't fail in tarball of the Git source code.
- Link to v4: https://lore.kernel.org/r/20250420-505-wire-up-sparse-via-meson-v4-0-66e14134e822@xxxxxxxxx

Changes in v4:
- Rename headers to headers_to_check, since these headers are only used
   for static analysis.
- Added a commit to rename third_party_sources -> third_party_excludes
   and remove a duplicate.
- Fix a typo 'gcrpyt' -> 'gcrypt'
- Remove 'generated_headers', since we use 'git ls-files' and that would
   already ignore files within '.gitignore'.
- Link to v3: https://lore.kernel.org/r/20250414-505-wire-up-sparse-via-meson-v3-0-edc6e7f26745@xxxxxxxxx

Changes in v3:
- Some renames:
   - headers_generated -> generated_headers
   - meson -> Meson
   - headers-check -> check-headers
   - headers_check_exclude -> exclude_from_check_headers
- Rewrite 'headers_check_exclude' to also contain dirs so we can skip
   listing individual header files.
- Move 'xdiff/*' to 'third_party_sources' and cleanup
   'exclude_from_check_headers'.
- Use 'echo' instead of 'echo -n'.
- Use `fs.replace_suffix` instead of `str.replace`.
- Link to v2: https://lore.kernel.org/r/20250410-505-wire-up-sparse-via-meson-v2-0-acb45cc8a2e5@xxxxxxxxx

Changes in v2:
- Add 'hdr-check' to meson, while introducing 'headers-check' as
   a replacement alias. Schedule 'hdr-check' to be deprecated in the future.
- Link to v1: https://lore.kernel.org/r/20250408-505-wire-up-sparse-via-meson-v1-0-17476e5cea3f@xxxxxxxxx

---
  .github/workflows/main.yml     | 14 +++++++
  Makefile                       |  4 +-
  ci/run-static-analysis.sh      |  2 +-
  contrib/coccinelle/meson.build | 31 ++++-----------
  meson.build                    | 86 ++++++++++++++++++++++++++++++++++++++++++
  5 files changed, 112 insertions(+), 25 deletions(-)

Karthik Nayak (6):
       ci/github: install git before checking out the repository
       coccinelle: meson: rename variables to be more specific
       meson: move headers definition from 'contrib/coccinelle'
       meson: rename 'third_party_sources' to 'third_party_excludes'
       meson: add support for 'hdr-check'
       makefile/meson: add 'check-headers' as alias for 'hdr-check'

Range-diff versus v4:

-:  ---------- > 1:  d20993a59e ci/github: install git before checking out the repository
1:  0f1160fa78 = 2:  6eb10dd3b1 coccinelle: meson: rename variables to be more specific
2:  933b199def ! 3:  7950b44c6f meson: move headers definition from 'contrib/coccinelle'
     @@ Commit message
          makes it easier to understand as the variable is now propagated from the
          top level to the bottom.
+ While 'headers_to_check' is only computed when we have a repository and
     +    the 'git' executable is present, the variable itself is exposed as an
     +    empty array. This allows dependencies in upcoming commits to simply
     +    check for length of the array and not worry about dependencies required
     +    to actually populate the array.
     +
          Signed-off-by: Karthik Nayak <karthik.188@xxxxxxxxx>
## contrib/coccinelle/meson.build ##
     @@ meson.build: builtin_sources = [
      +  ':!t/t[0-9][0-9][0-9][0-9]*',
      +]
      +
     -+if git.found()
     -+  headers_to_check = []
     ++headers_to_check = []
     ++if git.found() and fs.exists(meson.project_source_root() / '.git')
      +  foreach header : run_command(git, '-C', meson.project_source_root(), 'ls-files', '--deduplicate', '*.h', third_party_sources, check: true).stdout().split()
      +    headers_to_check += header
      +  endforeach
3:  ab04192864 ! 4:  7fd64b788b meson: rename 'third_party_sources' to 'third_party_excludes'
     @@ meson.build: third_party_sources = [
         ':!t/t[0-9][0-9][0-9][0-9]*',
       ]
- if git.found()
     -   headers_to_check = []
     + headers_to_check = []
     + if git.found() and fs.exists(meson.project_source_root() / '.git')
      -  foreach header : run_command(git, '-C', meson.project_source_root(), 'ls-files', '--deduplicate', '*.h', third_party_sources, check: true).stdout().split()
      +  foreach header : run_command(git, '-C', meson.project_source_root(), 'ls-files', '--deduplicate', '*.h', third_party_excludes, check: true).stdout().split()
           headers_to_check += header
4:  69a4b5abc9 ! 5:  df0472be57 meson: add support for 'hdr-check'
     @@ meson.build: third_party_excludes = [
      +  ':!xdiff',
       ]
- if git.found()
     + headers_to_check = []
      @@ meson.build: endif
subdir('contrib')
     @@ meson.build: endif
      +  exclude_from_check_headers += 'sha256/gcrypt.h'
      +endif
      +
     -+if git.found() and compiler.get_argument_syntax() == 'gcc'
     ++if headers_to_check.length() != 0 and compiler.get_argument_syntax() == 'gcc'
      +  hco_targets = []
      +  foreach h : headers_to_check
      +    skip_header = false
5:  a0c799cf8c ! 6:  7d9a33767b makefile/meson: add 'check-headers' as alias for 'hdr-check'
     @@ ci/run-static-analysis.sh: then
       make check-pot
## meson.build ##
     -@@ meson.build: if git.found() and compiler.get_argument_syntax() == 'gcc'
     +@@ meson.build: if headers_to_check.length() != 0 and compiler.get_argument_syntax() == 'gcc'
           hco_targets += hco
         endforeach

base-commit: 3a956c5f69873611ae5f8dcb9acd117f66b95ddc
change-id: 20250330-505-wire-up-sparse-via-meson-2e32dd31208b

Thanks
- Karthik






[Index of Archives]     [Linux Kernel Development]     [Gcc Help]     [IETF Annouce]     [DCCP]     [Netdev]     [Networking]     [Security]     [V4L]     [Bugtraq]     [Yosemite]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux SCSI]     [Fedora Users]

  Powered by Linux