On Fri, Jul 04, 2025 at 07:48:18PM +0800, Chao Yu wrote:
> As f2fs changes to use new mount APIs, let's add a new testcase
> to check mount result for all f2fs supported mount options and
> their combinations, in order to detect any inconsistency during
> mount.
>
> Cc: Jaegeuk Kim <jaegeuk@xxxxxxxxxx>
> Signed-off-by: Chao Yu <chao@xxxxxxxxxx>
> ---
> v2:
> - allow to check mount options w/ zoned device
> common/rc | 3 +
> tests/f2fs/015 | 159 ++++++++++++++++++++++++++++++++
> tests/f2fs/015.out | 225 +++++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 387 insertions(+)
> create mode 100755 tests/f2fs/015
> create mode 100644 tests/f2fs/015.out
>
> diff --git a/common/rc b/common/rc
> index f71cc8f0..94fdce7e 100644
> --- a/common/rc
> +++ b/common/rc
> @@ -844,6 +844,9 @@ _test_mkfs()
> ext2|ext3|ext4)
> $MKFS_PROG -t $FSTYP -- -F $MKFS_OPTIONS $* $TEST_DEV
> ;;
> + f2fs)
> + $MKFS_PROG -t $FSTYP -- -f $MKFS_OPTIONS $* $TEST_DEV
> + ;;
> xfs)
> _test_options mkfs
> $MKFS_PROG -t $FSTYP -- -f $TEST_OPTIONS $MKFS_OPTIONS $* $TEST_DEV
> diff --git a/tests/f2fs/015 b/tests/f2fs/015
> new file mode 100755
> index 00000000..746e79de
> --- /dev/null
> +++ b/tests/f2fs/015
> @@ -0,0 +1,159 @@
> +#! /bin/bash
> +# SPDX-License-Identifier: GPL-2.0
> +# Copyright (c) 2025 Chao Yu. All Rights Reserved.
> +#
> +# FS QA Test No. f2fs/015
> +#
> +# This testcase tries to check stability of mount result
> +# w/ all f2fs supported mount option and their combination.
> +#
> +. ./common/preamble
> +_begin_fstest auto quick
> +_require_kernel_config CONFIG_F2FS_FS_XATTR
> +_require_kernel_config CONFIG_F2FS_FS_POSIX_ACL
> +_require_kernel_config CONFIG_F2FS_FAULT_INJECTION
> +_require_kernel_config CONFIG_F2FS_FS_COMPRESSION
> +_require_kernel_config CONFIG_F2FS_FS_LZO
> +_require_kernel_config CONFIG_F2FS_FS_LZORLE
> +_require_kernel_config CONFIG_F2FS_FS_LZ4
> +_require_kernel_config CONFIG_F2FS_FS_LZ4HC
> +_require_kernel_config CONFIG_F2FS_FS_ZSTD
> +
> +_require_zoned_device "$TEST_DEV"
This requirement limit this test case only on zoned device...
Maybe you can slip this test case to 2~3 cases, let some common
mount options can be tested at first, some unimportant mount
options can be tested in another case, then zoned device related
mount options be tested in a seperated case ?
Thanks,
Zorro
> +_test_unmount >> $seqres.full 2>&1
> +
> +options=(
> +# mount_option mkfs_option
> + "background_gc=on" "" \
> + "background_gc=off" "" \
> + "background_gc=sync" "" \
> + "background_gc=on" "blkzone" \
> + "background_gc=off" "blkzone" \
> + "background_gc=sync" "blkzone" \
> + "disable_roll_forward" "" \
> + "norecovery" "" \
> + "discard" "" \
> + "nodiscard" "" \
> + "no_heap" "" \
> + "heap" "" \
> + "user_xattr" "" \
> + "nouser_xattr" "" \
> + "acl" "" \
> + "noacl" "" \
> + "active_logs=2" "" \
> + "active_logs=4" "" \
> + "active_logs=6" "" \
> + "disable_ext_identify" "" \
> + "inline_xattr" "" \
> + "noinline_xattr" "" \
> + "inline_xattr_size=400" "extra,flexible_inline_xattr"\
> + "inline_xattr_size=400" "" \
> + "inline_data" "" \
> + "noinline_dentry" "" \
> + "inline_dentry" "" \
> + "noinline_dentry" "" \
> + "flush_merge" "" \
> + "noflush_merge" "" \
> + "barrier" "" \
> + "nobarrier" "" \
> + "fastboot" "" \
> + "extent_cache" "" \
> + "noextent_cache" "" \
> + "data_flush" "" \
> + "reserve_root=32768" "" \
> + "resuid=1000" "" \
> + "resgid=1000" "" \
> + "fault_injection=100" "" \
> + "fault_type=4095" "" \
> + "mode=adaptive" "" \
> + "mode=lfs" "" \
> + "mode=fragment:segment" "" \
> + "mode=fragment:block" "" \
> + "mode=adaptive" "blkzone" \
> + "mode=lfs" "blkzone" \
> + "mode=fragment:segment" "blkzone" \
> + "mode=fragment:block" "blkzone" \
> + "usrquota" "" \
> + "grpquota" "" \
> + "prjquota" "" \
> + "usrjquota=ausrquota" "" \
> + "grpjquota=agrpquota" "" \
> + "prjjquota=aprjquota" "" \
> + "jqfmt=vfsold" "" \
> + "jqfmt=vfsv0" "" \
> + "jqfmt=vfsv1" "" \
> + "usrjquota=" "" \
> + "grpjquota=" "" \
> + "prjjquota=" "" \
> + "quota" "" \
> + "noquota" "" \
> + "alloc_mode=reuse" "" \
> + "alloc_mode=default" "" \
> + "fsync_mode=posix" "" \
> + "fsync_mode=strict" "" \
> + "fsync_mode=nobarrier" "" \
> + "test_dummy_encryption" "" \
> + "test_dummy_encryption=v1" "" \
> + "test_dummy_encryption=v2" "" \
> + "checkpoint=enable" "" \
> + "checkpoint=disable" "" \
> + "checkpoint=disable:32768" "" \
> + "checkpoint=disable:50%" "" \
> + "checkpoint_merge" "" \
> + "nocheckpoint_merge" "" \
> + "compress_algorithm=lzo" "" \
> + "compress_algorithm=lzo" "extra,compression" \
> + "compress_algorithm=lz4" "extra,compression" \
> + "compress_algorithm=zstd" "extra,compression" \
> + "compress_algorithm=lzo-rle" "extra,compression" \
> + "compress_algorithm=lz4:3" "extra,compression" \
> + "compress_algorithm=zstd:1" "extra,compression" \
> + "compress_log_size=8" "extra,compression" \
> + "compress_extension=so" "extra,compression" \
> + "nocompress_extension=so" "extra,compression" \
> + "nocompress_extension=*" "extra,compression" \
> + "compress_extension=so,nocompress_extension=so" \
> + "extra,compression" \
> + "compress_chksum" "extra,compression" \
> + "compress_mode=fs" "extra,compression" \
> + "compress_mode=user" "extra,compression" \
> + "compress_cache" "extra,compression" \
> + "inlinecrypt" "" \
> + "atgc" "" \
> + "discard_unit=block" "" \
> + "discard_unit=segment" "" \
> + "discard_unit=section" "" \
> + "discard_unit=block" "blkzone" \
> + "discard_unit=segment" "blkzone" \
> + "discard_unit=section" "blkzone" \
> + "memory=normal" "" \
> + "memory=low" "" \
> + "age_extent_cache" "" \
> + "errors=panic" "" \
> + "errors=continue" "" \
> + "errors=remount-ro" "" \
> + "nat_bits" "" \
> + "atgc,mode=lfs" "" \
> + "ro,flush_merge" "" \
> + "rw" "ro" \
> + "norecovery,ro" "" \
> +)
> +
> +for ((i=0;i<${#options[@]};i=i+2))
> +do
> + echo "Option#$i: ${options[$i]} : ${options[$((i+1))]}"
> + if [ "${options[$((i+1))]}" == "blkzone" ]; then
> + _test_mkfs "-m" >> $seqres.full
> + _test_mount "-o ${options[$i]}" >> $seqres.full 2>&1
> + echo $?
> + _test_unmount >> $seqres.full 2>&1
> + else
> + _scratch_mkfs "-O ${options[$((i+1))]}" >> $seqres.full
> + _try_scratch_mount "-o ${options[$i]}" >> $seqres.full 2>&1
> + echo $?
> + _scratch_unmount >> $seqres.full 2>&1
> + fi
> +done
> +
> +status=0
> +exit
> diff --git a/tests/f2fs/015.out b/tests/f2fs/015.out
> new file mode 100644
> index 00000000..d7f4e62a
> --- /dev/null
> +++ b/tests/f2fs/015.out
> @@ -0,0 +1,225 @@
> +QA output created by 015
> +Option#0: background_gc=on :
> +0
> +Option#2: background_gc=off :
> +0
> +Option#4: background_gc=sync :
> +0
> +Option#6: background_gc=on : blkzone
> +0
> +Option#8: background_gc=off : blkzone
> +32
> +Option#10: background_gc=sync : blkzone
> +0
> +Option#12: disable_roll_forward :
> +0
> +Option#14: norecovery :
> +32
> +Option#16: discard :
> +0
> +Option#18: nodiscard :
> +0
> +Option#20: no_heap :
> +0
> +Option#22: heap :
> +0
> +Option#24: user_xattr :
> +0
> +Option#26: nouser_xattr :
> +0
> +Option#28: acl :
> +0
> +Option#30: noacl :
> +0
> +Option#32: active_logs=2 :
> +0
> +Option#34: active_logs=4 :
> +0
> +Option#36: active_logs=6 :
> +0
> +Option#38: disable_ext_identify :
> +0
> +Option#40: inline_xattr :
> +0
> +Option#42: noinline_xattr :
> +0
> +Option#44: inline_xattr_size=400 : extra,flexible_inline_xattr
> +32
> +Option#46: inline_xattr_size=400 :
> +32
> +Option#48: inline_data :
> +0
> +Option#50: noinline_dentry :
> +0
> +Option#52: inline_dentry :
> +0
> +Option#54: noinline_dentry :
> +0
> +Option#56: flush_merge :
> +0
> +Option#58: noflush_merge :
> +0
> +Option#60: barrier :
> +0
> +Option#62: nobarrier :
> +0
> +Option#64: fastboot :
> +0
> +Option#66: extent_cache :
> +0
> +Option#68: noextent_cache :
> +0
> +Option#70: data_flush :
> +0
> +Option#72: reserve_root=32768 :
> +0
> +Option#74: resuid=1000 :
> +0
> +Option#76: resgid=1000 :
> +0
> +Option#78: fault_injection=100 :
> +0
> +Option#80: fault_type=4095 :
> +0
> +Option#82: mode=adaptive :
> +0
> +Option#84: mode=lfs :
> +0
> +Option#86: mode=fragment:segment :
> +0
> +Option#88: mode=fragment:block :
> +0
> +Option#90: mode=adaptive : blkzone
> +32
> +Option#92: mode=lfs : blkzone
> +0
> +Option#94: mode=fragment:segment : blkzone
> +32
> +Option#96: mode=fragment:block : blkzone
> +32
> +Option#98: usrquota :
> +0
> +Option#100: grpquota :
> +0
> +Option#102: prjquota :
> +32
> +Option#104: usrjquota=ausrquota :
> +32
> +Option#106: grpjquota=agrpquota :
> +32
> +Option#108: prjjquota=aprjquota :
> +32
> +Option#110: jqfmt=vfsold :
> +0
> +Option#112: jqfmt=vfsv0 :
> +0
> +Option#114: jqfmt=vfsv1 :
> +0
> +Option#116: usrjquota= :
> +0
> +Option#118: grpjquota= :
> +0
> +Option#120: prjjquota= :
> +0
> +Option#122: quota :
> +0
> +Option#124: noquota :
> +0
> +Option#126: alloc_mode=reuse :
> +0
> +Option#128: alloc_mode=default :
> +0
> +Option#130: fsync_mode=posix :
> +0
> +Option#132: fsync_mode=strict :
> +0
> +Option#134: fsync_mode=nobarrier :
> +0
> +Option#136: test_dummy_encryption :
> +32
> +Option#138: test_dummy_encryption=v1 :
> +32
> +Option#140: test_dummy_encryption=v2 :
> +32
> +Option#142: checkpoint=enable :
> +0
> +Option#144: checkpoint=disable :
> +0
> +Option#146: checkpoint=disable:32768 :
> +0
> +Option#148: checkpoint=disable:50% :
> +0
> +Option#150: checkpoint_merge :
> +0
> +Option#152: nocheckpoint_merge :
> +0
> +Option#154: compress_algorithm=lzo :
> +0
> +Option#156: compress_algorithm=lzo : extra,compression
> +0
> +Option#158: compress_algorithm=lz4 : extra,compression
> +0
> +Option#160: compress_algorithm=zstd : extra,compression
> +0
> +Option#162: compress_algorithm=lzo-rle : extra,compression
> +0
> +Option#164: compress_algorithm=lz4:3 : extra,compression
> +0
> +Option#166: compress_algorithm=zstd:1 : extra,compression
> +0
> +Option#168: compress_log_size=8 : extra,compression
> +0
> +Option#170: compress_extension=so : extra,compression
> +0
> +Option#172: nocompress_extension=so : extra,compression
> +0
> +Option#174: nocompress_extension=* : extra,compression
> +0
> +Option#176: compress_extension=so,nocompress_extension=so : extra,compression
> +0
> +Option#178: compress_chksum : extra,compression
> +0
> +Option#180: compress_mode=fs : extra,compression
> +0
> +Option#182: compress_mode=user : extra,compression
> +0
> +Option#184: compress_cache : extra,compression
> +0
> +Option#186: inlinecrypt :
> +0
> +Option#188: atgc :
> +0
> +Option#190: discard_unit=block :
> +0
> +Option#192: discard_unit=segment :
> +0
> +Option#194: discard_unit=section :
> +0
> +Option#196: discard_unit=block : blkzone
> +0
> +Option#198: discard_unit=segment : blkzone
> +0
> +Option#200: discard_unit=section : blkzone
> +0
> +Option#202: memory=normal :
> +0
> +Option#204: memory=low :
> +0
> +Option#206: age_extent_cache :
> +0
> +Option#208: errors=panic :
> +0
> +Option#210: errors=continue :
> +0
> +Option#212: errors=remount-ro :
> +0
> +Option#214: nat_bits :
> +0
> +Option#216: atgc,mode=lfs :
> +32
> +Option#218: ro,flush_merge :
> +32
> +Option#220: rw : ro
> +0
> +Option#222: norecovery,ro :
> +0
> --
> 2.49.0
>
