Read this blog post on how (not) to shut down a Ceph cluster https://www.croit.io/blog/how-not-to-shut-down-a-ceph-cluster On Wed, 6 Aug 2025 at 21:24, Eugen Block <eblock@xxxxxx> wrote: > You don't need to stop all the OSDs (or other daemons) manually, just > shut down the servers (most likely you have services colocated). When > they boot again, the Ceph daemons will also start automatically > (they're handled by systemd). I can check tomorrow which steps exactly > our shutdown procedure consists of when we have planned power outages > etc. > > Zitat von gagan tiwari <gagan.tiwari@xxxxxxxxxxxxxxxxxx>: > > > HI Eugen, > > We have 80 osds in the cluster. > > > > So, to stop them I will need to run the command *ceph orch stop > osd.<ID>* > > for all 80 osds one by one. > > Is there any way to stop all of them in one command ? > > > > Also, once all nodes will be back after power maintenance activity , > will I > > need to start all daemons mon , mds , osd,etc > > ? or will they be up automatically once servers will be up ? > > > > Thanks, > > Gagan > > > > On Wed, Aug 6, 2025 at 4:45 PM Eugen Block <eblock@xxxxxx> wrote: > > > >> Although SUSE discontinued their product, the procedure is still correct > >> [0]: > >> > >> 1. Tell the Ceph cluster not to mark OSDs as out: > >> > >> ceph osd set noout > >> > >> 2. Stop daemons and nodes in the following order: > >> > >> Storage clients > >> > >> Gateways, for example NFS Ganesha or Object Gateway > >> > >> Metadata Server > >> > >> Ceph OSD > >> > >> Ceph Manager > >> > >> Ceph Monitor > >> > >> 3. If required, perform maintenance tasks. > >> > >> 4. Start the nodes and servers in the reverse order of the shutdown > >> process: > >> > >> Ceph Monitor > >> > >> Ceph Manager > >> > >> Ceph OSD > >> > >> Metadata Server > >> > >> Gateways, for example NFS Ganesha or Object Gateway > >> > >> Storage clients > >> > >> 5. Remove the noout flag: > >> > >> ceph osd unset noout > >> > >> [0] > >> > >> > https://documentation.suse.com/en-us/ses/7.1/html/ses-all/storage-salt-cluster.html#sec-salt-cluster-reboot > >> > >> Zitat von gagan tiwari <gagan.tiwari@xxxxxxxxxxxxxxxxxx>: > >> > >> > Hi Guys, > >> > I have recently set-up a production ceph cluster > which > >> > consists of 3 monitor nodes and 7 Osd nodes. > >> > > >> > There is power maintenance activity scheduled at the data centre > coming > >> > weekend and due to that I need to power off all the devices. > >> > > >> > Can you please advise me on the safest way to power off all servers? > >> > > >> > Should I power off all 7 OSD servers one by one followed by all 3 > monitor > >> > nodes or vice versa? > >> > > >> > Thanks, > >> > Gagan > >> > _______________________________________________ > >> > ceph-users mailing list -- ceph-users@xxxxxxx > >> > To unsubscribe send an email to ceph-users-leave@xxxxxxx > >> > >> > >> _______________________________________________ > >> ceph-users mailing list -- ceph-users@xxxxxxx > >> To unsubscribe send an email to ceph-users-leave@xxxxxxx > >> > > > _______________________________________________ > ceph-users mailing list -- ceph-users@xxxxxxx > To unsubscribe send an email to ceph-users-leave@xxxxxxx _______________________________________________ ceph-users mailing list -- ceph-users@xxxxxxx To unsubscribe send an email to ceph-users-leave@xxxxxxx
 |