Add support for the speaker and headphone mute controls on Focusrite
Vocaster interfaces. Unlike other Focusrite interfaces, these mute
controls are per-output, not per-channel.
Signed-off-by: Geoffrey D. Bennett <g@xxxxx>
---
sound/usb/mixer_scarlett2.c | 97 ++++++++++++++++++++++++++++++++++++-
1 file changed, 96 insertions(+), 1 deletion(-)
diff --git a/sound/usb/mixer_scarlett2.c b/sound/usb/mixer_scarlett2.c
index e762d6110b1a..f2446bf3982c 100644
--- a/sound/usb/mixer_scarlett2.c
+++ b/sound/usb/mixer_scarlett2.c
@@ -10,8 +10,9 @@
* - Solo/2i2/4i4 Gen 4
* - Clarett 2Pre/4Pre/8Pre USB
* - Clarett+ 2Pre/4Pre/8Pre
+ * - Vocaster One/Two
*
- * Copyright (c) 2018-2024 by Geoffrey D. Bennett <g at b4.vu>
+ * Copyright (c) 2018-2025 by Geoffrey D. Bennett <g at b4.vu>
* Copyright (c) 2020-2021 by Vladimir Sadovnikov <sadko4u@xxxxxxxxx>
* Copyright (c) 2022 by Christian Colglazier <christian@xxxxxxxxxxxxxxxx>
*
@@ -75,6 +76,9 @@
* to many LinuxMusicians people and to Focusrite for hardware
* donations).
*
+ * Support for Vocaster One and Two added in Mar 2024 (thanks to many
+ * LinuxMusicians people and to Focusrite for hardware donations).
+ *
* This ALSA mixer gives access to (model-dependent):
* - input, output, mixer-matrix muxes
* - mixer-matrix gain stages
@@ -364,6 +368,21 @@ static const char *const scarlett2_dim_mute_names[SCARLETT2_DIM_MUTE_COUNT] = {
"Mute Playback Switch", "Dim Playback Switch"
};
+/* Vocaster One speaker/headphone mute names */
+static const char *const vocaster_one_sp_hp_mute_names[] = {
+ "Speaker Mute Playback Switch",
+ "Headphones Mute Playback Switch",
+ NULL
+};
+
+/* Vocaster Two speaker/headphone mute names */
+static const char *const vocaster_two_sp_hp_mute_names[] = {
+ "Speaker Mute Playback Switch",
+ "Headphones 1 Mute Playback Switch",
+ "Headphones 2 Mute Playback Switch",
+ NULL
+};
+
/* The autogain_status is set based on the autogain_switch and
* raw_autogain_status values.
*
@@ -547,6 +566,7 @@ enum {
SCARLETT2_CONFIG_DIRECT_MONITOR_GAIN,
SCARLETT2_CONFIG_BLUETOOTH_VOLUME,
SCARLETT2_CONFIG_SPDIF_MODE,
+ SCARLETT2_CONFIG_SP_HP_MUTE,
SCARLETT2_CONFIG_COUNT
};
@@ -814,6 +834,9 @@ static const struct scarlett2_config_set scarlett2_config_set_vocaster = {
[SCARLETT2_CONFIG_BLUETOOTH_VOLUME] = {
.offset = 0xbf, .size = 8, .activate = 28 },
+
+ [SCARLETT2_CONFIG_SP_HP_MUTE] = {
+ .offset = 0xab, .size = 8, .activate = 10 },
}
};
@@ -1177,6 +1200,9 @@ struct scarlett2_device_info {
/* additional description for the line out volume controls */
const char * const line_out_descrs[SCARLETT2_ANALOGUE_MAX];
+ /* Vocaster speaker/headphone mute control names */
+ const char * const *sp_hp_mute_names;
+
/* number of sources/destinations of each port type */
const int port_count[SCARLETT2_PORT_TYPE_COUNT][SCARLETT2_PORT_DIRNS];
@@ -1249,6 +1275,7 @@ struct scarlett2_data {
u8 level_switch[SCARLETT2_LEVEL_SWITCH_MAX];
u8 pad_switch[SCARLETT2_PAD_SWITCH_MAX];
u8 dim_mute[SCARLETT2_DIM_MUTE_COUNT];
+ u8 sp_hp_mute;
u8 air_switch[SCARLETT2_AIR_SWITCH_MAX];
u8 dsp_switch[SCARLETT2_DSP_SWITCH_MAX];
s32 compressor_values[SCARLETT2_COMPRESSOR_CTLS_MAX];
@@ -1791,6 +1818,7 @@ static const struct scarlett2_device_info vocaster_one_info = {
.peq_flt_total_count = 4,
.mute_input_count = 1,
.gain_input_count = 1,
+ .sp_hp_mute_names = vocaster_one_sp_hp_mute_names,
.port_count = {
[SCARLETT2_PORT_TYPE_NONE] = { 1, 0 },
@@ -1835,6 +1863,7 @@ static const struct scarlett2_device_info vocaster_two_info = {
.mute_input_count = 2,
.gain_input_count = 2,
.has_bluetooth = 1,
+ .sp_hp_mute_names = vocaster_two_sp_hp_mute_names,
.port_count = {
[SCARLETT2_PORT_TYPE_NONE] = { 1, 0 },
@@ -6293,6 +6322,61 @@ static const struct snd_kcontrol_new scarlett2_dim_mute_ctl = {
.put = scarlett2_dim_mute_ctl_put
};
+/*** Vocaster Speaker/Headphone Mute Controls ***/
+
+static int scarlett2_sp_hp_mute_ctl_get(struct snd_kcontrol *kctl,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct usb_mixer_elem_info *elem = kctl->private_data;
+ struct scarlett2_data *private = elem->head.mixer->private_data;
+
+ ucontrol->value.integer.value[0] =
+ !!(private->sp_hp_mute & (1 << elem->control));
+
+ return 0;
+}
+
+static int scarlett2_sp_hp_mute_ctl_put(struct snd_kcontrol *kctl,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct usb_mixer_elem_info *elem = kctl->private_data;
+ struct usb_mixer_interface *mixer = elem->head.mixer;
+ struct scarlett2_data *private = mixer->private_data;
+ int index = elem->control;
+ int val, err;
+
+ guard(mutex)(&private->data_mutex);
+
+ if (private->hwdep_in_use)
+ return -EBUSY;
+
+ val = private->sp_hp_mute;
+
+ if (ucontrol->value.integer.value[0])
+ val |= (1 << index);
+ else
+ val &= ~(1 << index);
+
+ if (val == private->sp_hp_mute)
+ return 0;
+
+ private->sp_hp_mute = val;
+
+ /* Send change to the device */
+ err = scarlett2_usb_set_config(mixer, SCARLETT2_CONFIG_SP_HP_MUTE,
+ 0, val);
+
+ return err < 0 ? err : 1;
+}
+
+static const struct snd_kcontrol_new scarlett2_sp_hp_mute_ctl = {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "",
+ .info = snd_ctl_boolean_mono_info,
+ .get = scarlett2_sp_hp_mute_ctl_get,
+ .put = scarlett2_sp_hp_mute_ctl_put
+};
+
/*** Create the analogue output controls ***/
static int scarlett2_add_line_out_ctls(struct usb_mixer_interface *mixer)
@@ -6325,6 +6409,17 @@ static int scarlett2_add_line_out_ctls(struct usb_mixer_interface *mixer)
return err;
}
+ /* Add Vocaster speaker/headphone mute controls */
+ if (private->info->sp_hp_mute_names)
+ for (i = 0; private->info->sp_hp_mute_names[i]; i++) {
+ err = scarlett2_add_new_ctl(
+ mixer, &scarlett2_sp_hp_mute_ctl,
+ i, 1, private->info->sp_hp_mute_names[i],
+ NULL);
+ if (err < 0)
+ return err;
+ }
+
/* Remaining controls are only applicable if the device
* has per-channel line-out volume controls.
*/
--
2.45.0
[Index of Archives]
[Pulseaudio]
[Linux Audio Users]
[ALSA Devel]
[Fedora Desktop]
[Fedora SELinux]
[Big List of Linux Books]
[Yosemite News]
[KDE Users]