Intel Core 2 Quad Q8400 reported as Unknown CPU

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello!

I upgraded my Intel Core 2 Duo to a Core 2 Quad Q8400 on my Intel DP35DP motherboard.
I send this mail because I found this messages in my dmesg:

p4-clockmod: Unknown CPU. Please send an e-mail to <cpufreq@xxxxxxxxxxxxxxx>
p4-clockmod: Unknown CPU. Please send an e-mail to <cpufreq@xxxxxxxxxxxxxxx>
p4-clockmod: Unknown CPU. Please send an e-mail to <cpufreq@xxxxxxxxxxxxxxx>
p4-clockmod: Unknown CPU. Please send an e-mail to <cpufreq@xxxxxxxxxxxxxxx>

cpuinfo and dmesg are at the end of this e-mail. I'm a bit worried because
I bought the new CPU to have hardware virtualization support (VT-X).
  http://ark.intel.com/Product.aspx?id=38512&processor=Q8400&spec-codes=SLGT6
but cpuinfo does not list the vtx flag for me. I'm using Fedora 13 and I
tried booting to a F14 USB stick as well and neither shows the vtx flag.

uname -a
Linux tux.hip.helsinki.fi 2.6.34.8-68.fc13.x86_64 #1 SMP Thu Feb 17
15:03:58 UTC 2011 x86_64 x86_64 x86_64 GNU/Linux

Best regards,                          Tomas Lindén
--------------------------------------------------------------------------
I           ,                                                            I
I Tomas Linden                   Helsinki Institute of Physics (HIP)     I
I Tomas.Linden@xxxxxxxxxxx       P.O. Box 64 (Gustaf Hällströmin katu 2) I
I phone: +358-9-191 505 63       FI-00014 UNIVERSITY OF HELSINKI         I
I fax:   +358-9-191 505 22       Finland                                 I
I WWW: http://www.physics.helsinki.fi/~tlinden/eindex.html               I
--------------------------------------------------------------------------

processor	: 0
vendor_id	: GenuineIntel
cpu family	: 6
model		: 23
model name	: 06/17
stepping	: 10
cpu MHz		: 2666.121
cache size	: 2048 KB
physical id	: 0
siblings	: 4
core id		: 0
cpu cores	: 4
apicid		: 0
initial apicid	: 0
fpu		: yes
fpu_exception	: yes
cpuid level	: 13
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good aperfmperf pni tm2 ssse3 lahf_lm
bogomips	: 5332.24
clflush size	: 64
cache_alignment	: 64
address sizes	: 36 bits physical, 48 bits virtual
power management:

processor	: 1
vendor_id	: GenuineIntel
cpu family	: 6
model		: 23
model name	: 06/17
stepping	: 10
cpu MHz		: 2666.121
cache size	: 2048 KB
physical id	: 0
siblings	: 4
core id		: 2
cpu cores	: 4
apicid		: 2
initial apicid	: 2
fpu		: yes
fpu_exception	: yes
cpuid level	: 13
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good aperfmperf pni tm2 ssse3 lahf_lm
bogomips	: 5332.55
clflush size	: 64
cache_alignment	: 64
address sizes	: 36 bits physical, 48 bits virtual
power management:

processor	: 2
vendor_id	: GenuineIntel
cpu family	: 6
model		: 23
model name	: 06/17
stepping	: 10
cpu MHz		: 2666.121
cache size	: 2048 KB
physical id	: 0
siblings	: 4
core id		: 1
cpu cores	: 4
apicid		: 1
initial apicid	: 1
fpu		: yes
fpu_exception	: yes
cpuid level	: 13
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good aperfmperf pni tm2 ssse3 lahf_lm
bogomips	: 5332.53
clflush size	: 64
cache_alignment	: 64
address sizes	: 36 bits physical, 48 bits virtual
power management:

processor	: 3
vendor_id	: GenuineIntel
cpu family	: 6
model		: 23
model name	: 06/17
stepping	: 10
cpu MHz		: 2666.121
cache size	: 2048 KB
physical id	: 0
siblings	: 4
core id		: 3
cpu cores	: 4
apicid		: 3
initial apicid	: 3
fpu		: yes
fpu_exception	: yes
cpuid level	: 13
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good aperfmperf pni tm2 ssse3 lahf_lm
bogomips	: 5332.54
clflush size	: 64
cache_alignment	: 64
address sizes	: 36 bits physical, 48 bits virtual
power management:

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.34.8-68.fc13.x86_64 (mockbuild@xxxxxxxxxxxxxxxxxxxxxxxxxxxxx) (gcc version 4.4.5 20101112 (Red Hat 4.4.5-2) (GCC) ) #1 SMP Thu Feb 17 15:03:58 UTC 2011
Command line: ro root=UUID=ae23d95e-b0e0-48ca-81e7-eccef48aade8 rd_MD_UUID=7988d98b:93cfc98d:579630b2:b0330fd3 rd_NO_LUKS rd_NO_LVM rd_NO_DM LANG=en_US SYSFONT=lat0-16 KEYBOARDTYPE=pc KEYTABLE=fi-latin1 nomodeset vga=792 nouveau.modeset=0 rdblacklist=nouveau selinx=0 SYSFONTACM=iso15
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009e000 (usable)
 BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 00000000cea8f000 (usable)
 BIOS-e820: 00000000cea8f000 - 00000000ceb6d000 (ACPI NVS)
 BIOS-e820: 00000000ceb6d000 - 00000000cfd5f000 (usable)
 BIOS-e820: 00000000cfd5f000 - 00000000cfd61000 (reserved)
 BIOS-e820: 00000000cfd61000 - 00000000cfe6f000 (usable)
 BIOS-e820: 00000000cfe6f000 - 00000000cfee5000 (ACPI NVS)
 BIOS-e820: 00000000cfee5000 - 00000000cfeeb000 (usable)
 BIOS-e820: 00000000cfeeb000 - 00000000cfef2000 (ACPI data)
 BIOS-e820: 00000000cfef2000 - 00000000cfef3000 (usable)
 BIOS-e820: 00000000cfef3000 - 00000000cfeff000 (ACPI data)
 BIOS-e820: 00000000cfeff000 - 00000000cff00000 (usable)
 BIOS-e820: 00000000cff00000 - 00000000d0000000 (reserved)
 BIOS-e820: 00000000f0000000 - 00000000f8000000 (reserved)
 BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
 BIOS-e820: 0000000100000000 - 000000012c000000 (usable)
NX (Execute Disable) protection: active
DMI 2.4 present.
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x12c000 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-DFFFF write-protect
  E0000-FFFFF uncachable
MTRR variable ranges enabled:
  0 base 0CFF00000 mask FFFF00000 uncachable
  1 base 0D0000000 mask FF0000000 uncachable
  2 base 0E0000000 mask FE0000000 uncachable
  3 base 0CFE8B000 mask FFFFFF000 write-back
  4 disabled
  5 disabled
  6 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
last_pfn = 0xcff00 max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
found SMP MP-table at [ffff8800000fe200] fe200
init_memory_mapping: 0000000000000000-00000000cff00000
 0000000000 - 00cfe00000 page 2M
 00cfe00000 - 00cff00000 page 4k
kernel direct mapping tables up to cff00000 @ 8000-e000
init_memory_mapping: 0000000100000000-000000012c000000
 0100000000 - 012c000000 page 2M
kernel direct mapping tables up to 12c000000 @ c000-12000
RAMDISK: 3739b000 - 37ff0000
ACPI: RSDP 00000000000fe020 00014 (v00 INTEL )
ACPI: RSDT 00000000cfefd038 00058 (v01 INTEL  DP35DP   0000023C      01000013)
ACPI: FACP 00000000cfefc000 00074 (v01 INTEL  DP35DP   0000023C MSFT 01000013)
ACPI: DSDT 00000000cfef8000 03DE9 (v01 INTEL  DP35DP   0000023C MSFT 01000013)
ACPI: FACS 00000000cfe7a000 00040
ACPI: APIC 00000000cfef7000 00078 (v01 INTEL  DP35DP   0000023C MSFT 01000013)
ACPI: WDDT 00000000cfef6000 00040 (v01 INTEL  DP35DP   0000023C MSFT 01000013)
ACPI: MCFG 00000000cfef5000 0003C (v01 INTEL  DP35DP   0000023C MSFT 01000013)
ACPI: ASF! 00000000cfef4000 000A6 (v32 INTEL  DP35DP   0000023C MSFT 01000013)
ACPI: HPET 00000000cfef3000 00038 (v01 INTEL  DP35DP   0000023C MSFT 01000013)
ACPI: ASPT 00000000cfef1000 00034 (v03 INTEL  DP35DP   0000023C MSFT 01000013)
ACPI: WDTT 00000000cfef0000 002CC (v01 INTEL  DP35DP   0000023C MSFT 01000013)
ACPI: SSDT 00000000cfeef000 00204 (v01 INTEL     CpuPm 0000023C MSFT 01000013)
ACPI: SSDT 00000000cfeee000 001CF (v01 INTEL   Cpu0Cst 0000023C MSFT 01000013)
ACPI: SSDT 00000000cfeed000 001CF (v01 INTEL   Cpu1Cst 0000023C MSFT 01000013)
ACPI: SSDT 00000000cfeec000 001CF (v01 INTEL   Cpu2Cst 0000023C MSFT 01000013)
ACPI: SSDT 00000000cfeeb000 001CF (v01 INTEL   Cpu3Cst 0000023C MSFT 01000013)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at 0000000000000000-000000012c000000
Initmem setup node 0 0000000000000000-000000012c000000
  NODE_DATA [0000000100000000 - 0000000100013fff]
  bootmap [0000000100014000 -  00000001000397ff] pages 26
(13/32 early reservations) ==> bootmem [0000000000 - 012c000000]
  #0 [0001000000 - 0001e0ae88]    TEXT DATA BSS ==> [0001000000 - 0001e0ae88]
  #1 [003739b000 - 0037ff0000]          RAMDISK ==> [003739b000 - 0037ff0000]
  #2 [0001e0b000 - 0001e0b15e]              BRK ==> [0001e0b000 - 0001e0b15e]
  #3 [000009e000 - 00000fe200]    BIOS reserved ==> [000009e000 - 00000fe200]
  #4 [00000fe200 - 00000fe210]     MP-table mpf ==> [00000fe200 - 00000fe210]
  #5 [00000fe250 - 0000100000]    BIOS reserved ==> [00000fe250 - 0000100000]
  #6 [00000fe210 - 00000fe250]     MP-table mpc ==> [00000fe210 - 00000fe250]
  #7 [0000001000 - 0000003000]       TRAMPOLINE ==> [0000001000 - 0000003000]
  #8 [0000003000 - 0000007000]      ACPI WAKEUP ==> [0000003000 - 0000007000]
  #9 [0000008000 - 000000c000]          PGTABLE ==> [0000008000 - 000000c000]
  #10 [000000c000 - 000000d000]          PGTABLE ==> [000000c000 - 000000d000]
  #11 [0100000000 - 0100014000]        NODE_DATA ==> [0100000000 - 0100014000]
  #12 [0100014000 - 010003a000]          BOOTMAP ==> [0100014000 - 010003a000]
 [ffffea0000000000-ffffea00043fffff] PMD -> [ffff880100600000-ffff880103ffffff] on node 0
Zone PFN ranges:
  DMA      0x00000001 -> 0x00001000
  DMA32    0x00001000 -> 0x00100000
  Normal   0x00100000 -> 0x0012c000
Movable zone start PFN for each node
early_node_map[8] active PFN ranges
    0: 0x00000001 -> 0x0000009e
    0: 0x00000100 -> 0x000cea8f
    0: 0x000ceb6d -> 0x000cfd5f
    0: 0x000cfd61 -> 0x000cfe6f
    0: 0x000cfee5 -> 0x000cfeeb
    0: 0x000cfef2 -> 0x000cfef3
    0: 0x000cfeff -> 0x000cff00
    0: 0x00100000 -> 0x0012c000
On node 0 totalpages: 1031476
  DMA zone: 56 pages used for memmap
  DMA zone: 108 pages reserved
  DMA zone: 3833 pages, LIFO batch:0
  DMA32 zone: 14280 pages used for memmap
  DMA32 zone: 832975 pages, LIFO batch:31
  Normal zone: 2464 pages used for memmap
  Normal zone: 177760 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a301 base: 0xfed00000
SMP: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 00000000cea8f000 - 00000000ceb6d000
PM: Registered nosave memory: 00000000cfd5f000 - 00000000cfd61000
PM: Registered nosave memory: 00000000cfe6f000 - 00000000cfee5000
PM: Registered nosave memory: 00000000cfeeb000 - 00000000cfef2000
PM: Registered nosave memory: 00000000cfef3000 - 00000000cfeff000
PM: Registered nosave memory: 00000000cff00000 - 00000000d0000000
PM: Registered nosave memory: 00000000d0000000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000f8000000
PM: Registered nosave memory: 00000000f8000000 - 00000000fff00000
PM: Registered nosave memory: 00000000fff00000 - 0000000100000000
Allocating PCI resources starting at d0000000 (gap: d0000000:20000000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff880002000000 s89768 r8192 d20824 u524288
pcpu-alloc: s89768 r8192 d20824 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1014568
Policy zone: Normal
Kernel command line: ro root=UUID=ae23d95e-b0e0-48ca-81e7-eccef48aade8 rd_MD_UUID=7988d98b:93cfc98d:579630b2:b0330fd3 rd_NO_LUKS rd_NO_LVM rd_NO_DM LANG=en_US SYSFONT=lat0-16 KEYBOARDTYPE=pc KEYTABLE=fi-latin1 nomodeset vga=792 nouveau.modeset=0 rdblacklist=nouveau selinx=0 SYSFONTACM=iso15
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 3972596k/4915200k available (4437k kernel code, 789296k absent, 153308k reserved, 7430k data, 920k init)
SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:16640 nr_irqs:440
Console: colour dummy device 80x25
console [tty0] enabled
allocated 41943040 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2666.121 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5332.24 BogoMIPS (lpj=2666121)
Security Framework initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
Performance Events: Core2 events, Intel PMU driver.
... version:                2
... bit width:              40
... generic registers:      2
... value mask:             000000ffffffffff
... max period:             000000007fffffff
... fixed-purpose events:   3
... event mask:             0000000700000003
ACPI: Core revision 20100121
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 20500 entries in 81 pages
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel 06/17 stepping 0a
Booting Node   0, Processors  #1 #2 #3 Ok.
Brought up 4 CPUs
Total of 4 processors activated (21329.87 BogoMIPS).
sizeof(vma)=184 bytes
sizeof(page)=56 bytes
sizeof(inode)=584 bytes
sizeof(dentry)=192 bytes
sizeof(ext3inode)=800 bytes
sizeof(buffer_head)=104 bytes
sizeof(skbuff)=232 bytes
sizeof(task_struct)=6000 bytes
devtmpfs: initialized
Time: 14:26:56  Date: 04/29/11
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000e0000-0x000effff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0xf8000000-0xfeafffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0xd0000000-0xefffffff] (ignored)
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:03.0: reg 10: [mem 0xe3226100-0xe322610f 64bit]
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:19.0: reg 10: [mem 0xe3200000-0xe321ffff]
pci 0000:00:19.0: reg 14: [mem 0xe3224000-0xe3224fff]
pci 0000:00:19.0: reg 18: [io  0x3400-0x341f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: PME# disabled
pci 0000:00:1a.0: reg 20: [io  0x30e0-0x30ff]
pci 0000:00:1a.1: reg 20: [io  0x30c0-0x30df]
pci 0000:00:1a.2: reg 20: [io  0x30a0-0x30bf]
pci 0000:00:1a.7: reg 10: [mem 0xe3225c00-0xe3225fff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: reg 10: [mem 0xe3220000-0xe3223fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PME# disabled
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1d.0: reg 20: [io  0x3080-0x309f]
pci 0000:00:1d.1: reg 20: [io  0x3060-0x307f]
pci 0000:00:1d.2: reg 20: [io  0x3040-0x305f]
pci 0000:00:1d.7: reg 10: [mem 0xe3225800-0xe3225bff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: [io  0x0400-0x047f] claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: [io  0x0500-0x053f] claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 007f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0810 (mask 007f)
pci 0000:00:1f.2: reg 10: [io  0x3428-0x342f]
pci 0000:00:1f.2: reg 14: [io  0x3434-0x3437]
pci 0000:00:1f.2: reg 18: [io  0x3420-0x3427]
pci 0000:00:1f.2: reg 1c: [io  0x3430-0x3433]
pci 0000:00:1f.2: reg 20: [io  0x3020-0x303f]
pci 0000:00:1f.2: reg 24: [mem 0xe3225000-0xe32257ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10: [mem 0xe3226000-0xe32260ff 64bit]
pci 0000:00:1f.3: reg 20: [io  0x3000-0x301f]
pci 0000:01:00.0: reg 10: [mem 0xe2000000-0xe2ffffff]
pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:01:00.0: reg 1c: [mem 0xe0000000-0xe1ffffff 64bit]
pci 0000:01:00.0: reg 24: [io  0x2000-0x207f]
pci 0000:01:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0:   bridge window [io  0x2000-0x2fff]
pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xe2ffffff]
pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:00:1c.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1c.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:03:00.0: reg 10: [io  0x1018-0x101f]
pci 0000:03:00.0: reg 14: [io  0x1024-0x1027]
pci 0000:03:00.0: reg 18: [io  0x1010-0x1017]
pci 0000:03:00.0: reg 1c: [io  0x1020-0x1023]
pci 0000:03:00.0: reg 20: [io  0x1000-0x100f]
pci 0000:03:00.0: reg 24: [mem 0xe3100000-0xe31001ff]
pci 0000:03:00.0: supports D1
pci 0000:03:00.0: PME# supported from D0 D1 D3hot
pci 0000:03:00.0: PME# disabled
pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.1: PCI bridge to [bus 03-03]
pci 0000:00:1c.1:   bridge window [io  0x1000-0x1fff]
pci 0000:00:1c.1:   bridge window [mem 0xe3100000-0xe31fffff]
pci 0000:00:1c.1:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1c.2: PCI bridge to [bus 04-04]
pci 0000:00:1c.2:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:00:1c.2:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1c.2:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1c.3: PCI bridge to [bus 05-05]
pci 0000:00:1c.3:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:00:1c.3:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1c.3:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1c.4: PCI bridge to [bus 06-06]
pci 0000:00:1c.4:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:00:1c.4:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1c.4:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:07:03.0: reg 10: [mem 0xe3004000-0xe30047ff]
pci 0000:07:03.0: reg 14: [mem 0xe3000000-0xe3003fff]
pci 0000:07:03.0: supports D1 D2
pci 0000:07:03.0: PME# supported from D0 D1 D2 D3hot
pci 0000:07:03.0: PME# disabled
pci 0000:00:1e.0: PCI bridge to [bus 07-07] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:00:1e.0:   bridge window [mem 0xe3000000-0xe30fffff]
pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1e.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x00000000-0xffffffffffffffff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *9 10 11 12)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 *10 11 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 *9 10 11 12)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 *10 11 12)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12)
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009e000 - 000000000009ffff
reserve RAM buffer: 00000000cea8f000 - 00000000cfffffff
reserve RAM buffer: 00000000cfd5f000 - 00000000cfffffff
reserve RAM buffer: 00000000cfe6f000 - 00000000cfffffff
reserve RAM buffer: 00000000cfeeb000 - 00000000cfffffff
reserve RAM buffer: 00000000cfef3000 - 00000000cfffffff
reserve RAM buffer: 00000000cff00000 - 00000000cfffffff
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: [mem 0xf0000000-0xf7ffffff] has been reserved
system 00:01: [mem 0xfeb00000-0xfeb03fff] has been reserved
system 00:01: [mem 0xfed13000-0xfed13fff] has been reserved
system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:01: [mem 0xfed45000-0xfed99fff] has been reserved
system 00:01: [mem 0x000c0000-0x000dffff] has been reserved
system 00:01: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:01: [mem 0xffc00000-0xffffffff] could not be reserved
system 00:06: [io  0x0500-0x053f] has been reserved
system 00:06: [io  0x0400-0x047f] has been reserved
system 00:06: [io  0x0680-0x06ff] has been reserved
pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
pci 0000:00:1c.0: BAR 14: assigned [mem 0xe3300000-0xe34fffff]
pci 0000:00:1c.0: BAR 15: assigned [mem 0xe3500000-0xe36fffff 64bit pref]
pci 0000:00:1c.1: BAR 15: assigned [mem 0xe3700000-0xe38fffff 64bit pref]
pci 0000:00:1c.2: BAR 14: assigned [mem 0xe3900000-0xe3afffff]
pci 0000:00:1c.2: BAR 15: assigned [mem 0xe3b00000-0xe3cfffff 64bit pref]
pci 0000:00:1c.3: BAR 14: assigned [mem 0xe3d00000-0xe3efffff]
pci 0000:00:1c.3: BAR 15: assigned [mem 0xe3f00000-0xe40fffff 64bit pref]
pci 0000:00:1c.4: BAR 14: assigned [mem 0xe4100000-0xe42fffff]
pci 0000:00:1c.4: BAR 15: assigned [mem 0xe4300000-0xe44fffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io  0x4000-0x4fff]
pci 0000:00:1c.2: BAR 13: assigned [io  0x5000-0x5fff]
pci 0000:00:1c.3: BAR 13: assigned [io  0x6000-0x6fff]
pci 0000:00:1c.4: BAR 13: assigned [io  0x7000-0x7fff]
pci 0000:01:00.0: BAR 6: can't assign mem pref (size 0x20000)
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0:   bridge window [io  0x2000-0x2fff]
pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xe2ffffff]
pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0:   bridge window [io  0x4000-0x4fff]
pci 0000:00:1c.0:   bridge window [mem 0xe3300000-0xe34fffff]
pci 0000:00:1c.0:   bridge window [mem 0xe3500000-0xe36fffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 03-03]
pci 0000:00:1c.1:   bridge window [io  0x1000-0x1fff]
pci 0000:00:1c.1:   bridge window [mem 0xe3100000-0xe31fffff]
pci 0000:00:1c.1:   bridge window [mem 0xe3700000-0xe38fffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 04-04]
pci 0000:00:1c.2:   bridge window [io  0x5000-0x5fff]
pci 0000:00:1c.2:   bridge window [mem 0xe3900000-0xe3afffff]
pci 0000:00:1c.2:   bridge window [mem 0xe3b00000-0xe3cfffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 05-05]
pci 0000:00:1c.3:   bridge window [io  0x6000-0x6fff]
pci 0000:00:1c.3:   bridge window [mem 0xe3d00000-0xe3efffff]
pci 0000:00:1c.3:   bridge window [mem 0xe3f00000-0xe40fffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 06-06]
pci 0000:00:1c.4:   bridge window [io  0x7000-0x7fff]
pci 0000:00:1c.4:   bridge window [mem 0xe4100000-0xe42fffff]
pci 0000:00:1c.4:   bridge window [mem 0xe4300000-0xe44fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 07-07]
pci 0000:00:1e.0:   bridge window [io  disabled]
pci 0000:00:1e.0:   bridge window [mem 0xe3000000-0xe30fffff]
pci 0000:00:1e.0:   bridge window [mem pref disabled]
  alloc irq_desc for 16 on node -1
  alloc kstat_irqs on node -1
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: enabling device (0000 -> 0003)
  alloc irq_desc for 17 on node -1
  alloc kstat_irqs on node -1
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
  alloc irq_desc for 20 on node -1
  alloc kstat_irqs on node -1
pci 0000:00:1c.1: PCI INT B -> GSI 20 (level, low) -> IRQ 20
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1c.2: enabling device (0000 -> 0003)
  alloc irq_desc for 18 on node -1
  alloc kstat_irqs on node -1
pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.2: setting latency timer to 64
pci 0000:00:1c.3: enabling device (0000 -> 0003)
  alloc irq_desc for 19 on node -1
  alloc kstat_irqs on node -1
pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.3: setting latency timer to 64
pci 0000:00:1c.4: enabling device (0000 -> 0003)
pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffffffffffff]
pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
pci_bus 0000:01: resource 1 [mem 0xe0000000-0xe2ffffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:02: resource 0 [io  0x4000-0x4fff]
pci_bus 0000:02: resource 1 [mem 0xe3300000-0xe34fffff]
pci_bus 0000:02: resource 2 [mem 0xe3500000-0xe36fffff 64bit pref]
pci_bus 0000:03: resource 0 [io  0x1000-0x1fff]
pci_bus 0000:03: resource 1 [mem 0xe3100000-0xe31fffff]
pci_bus 0000:03: resource 2 [mem 0xe3700000-0xe38fffff 64bit pref]
pci_bus 0000:04: resource 0 [io  0x5000-0x5fff]
pci_bus 0000:04: resource 1 [mem 0xe3900000-0xe3afffff]
pci_bus 0000:04: resource 2 [mem 0xe3b00000-0xe3cfffff 64bit pref]
pci_bus 0000:05: resource 0 [io  0x6000-0x6fff]
pci_bus 0000:05: resource 1 [mem 0xe3d00000-0xe3efffff]
pci_bus 0000:05: resource 2 [mem 0xe3f00000-0xe40fffff 64bit pref]
pci_bus 0000:06: resource 0 [io  0x7000-0x7fff]
pci_bus 0000:06: resource 1 [mem 0xe4100000-0xe42fffff]
pci_bus 0000:06: resource 2 [mem 0xe4300000-0xe44fffff 64bit pref]
pci_bus 0000:07: resource 1 [mem 0xe3000000-0xe30fffff]
pci_bus 0000:07: resource 4 [io  0x0000-0xffff]
pci_bus 0000:07: resource 5 [mem 0x00000000-0xffffffffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 12628k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff88000219d000 - ffff88000619d000
software IO TLB at phys 0x219d000 - 0x619d000
audit: initializing netlink socket (disabled)
type=2000 audit(1304087216.569:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 7783
SELinux:  Registering netfilter hooks
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: setting latency timer to 64
  alloc irq_desc for 24 on node -1
  alloc kstat_irqs on node -1
pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
pcieport 0000:00:1c.0: setting latency timer to 64
  alloc irq_desc for 25 on node -1
  alloc kstat_irqs on node -1
pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X
pcieport 0000:00:1c.1: setting latency timer to 64
  alloc irq_desc for 26 on node -1
  alloc kstat_irqs on node -1
pcieport 0000:00:1c.1: irq 26 for MSI/MSI-X
pcieport 0000:00:1c.2: setting latency timer to 64
  alloc irq_desc for 27 on node -1
  alloc kstat_irqs on node -1
pcieport 0000:00:1c.2: irq 27 for MSI/MSI-X
pcieport 0000:00:1c.3: setting latency timer to 64
  alloc irq_desc for 28 on node -1
  alloc kstat_irqs on node -1
pcieport 0000:00:1c.3: irq 28 for MSI/MSI-X
pcieport 0000:00:1c.4: setting latency timer to 64
  alloc irq_desc for 29 on node -1
  alloc kstat_irqs on node -1
pcieport 0000:00:1c.4: irq 29 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
pci-stub: invalid id string ""
vesafb: framebuffer at 0xe1000000, mapped to 0xffffc90009100000, using 6144k, total 14336k
vesafb: mode is 1024x768x32, linelength=4096, pages=1
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
Monitor-Mwait will be used to enter C-1 state
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
brd: module loaded
loop: module loaded
ahci 0000:00:1f.2: version 3.0
  alloc irq_desc for 21 on node -1
  alloc kstat_irqs on node -1
ahci 0000:00:1f.2: PCI INT A -> GSI 21 (level, low) -> IRQ 21
  alloc irq_desc for 30 on node -1
  alloc kstat_irqs on node -1
ahci 0000:00:1f.2: irq 30 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pmp pio slum part ccc ems
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 30
ata2: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 30
ata3: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 30
ata4: SATA max UDMA/133 abar m2048@0xe3225000 port 0xe3225280 irq 30
ata5: SATA max UDMA/133 abar m2048@0xe3225000 port 0xe3225300 irq 30
ata6: SATA max UDMA/133 abar m2048@0xe3225000 port 0xe3225380 irq 30
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 17 (level, low) -> IRQ 17
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.7: irq 17, io mem 0xe3225c00
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.34.8-68.fc13.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
  alloc irq_desc for 23 on node -1
  alloc kstat_irqs on node -1
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xe3225800
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.34.8-68.fc13.x86_64 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 18, io base 0x000030e0
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.34.8-68.fc13.x86_64 uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x000030c0
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.34.8-68.fc13.x86_64 uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 17 (level, low) -> IRQ 17
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
ata4: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 17, io base 0x000030a0
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.34.8-68.fc13.x86_64 uhci_hcd
usb usb5: SerialNumber: 0000:00:1a.2
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 23, io base 0x00003080
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.34.8-68.fc13.x86_64 uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00003060
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 2.6.34.8-68.fc13.x86_64 uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.1
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00003040
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: UHCI Host Controller
usb usb8: Manufacturer: Linux 2.6.34.8-68.fc13.x86_64 uhci_hcd
usb usb8: SerialNumber: 0000:00:1d.2
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@xxxxxxxxxx
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
PM: Resume from disk failed.
registered taskstats version 1
  Magic number: 7:27:436
rtc_cmos 00:03: setting system clock to 2011-04-29 14:26:57 UTC (1304087217)
Initalizing network drop monitor service
usb 2-6: new high speed USB device using ehci_hcd and address 2
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATAPI: TSSTcorp CDDVDW SH-S203P, SB01, max UDMA/100
ata1.00: ATA-7: ST3250410AS, 3.AAC, max UDMA/133
ata1.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      ST3250410AS      3.AA PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda:
ata3.00: configured for UDMA/100
 sda1 sda2 sda3 sda4 < sda5 >
sd 0:0:0:0: [sda] Attached SCSI disk
ata2.00: ATA-7: ST3250410AS, 3.AAC, max UDMA/133
ata2.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access     ATA      ST3250410AS      3.AA PQ: 0 ANSI: 5
usb 2-6: New USB device found, idVendor=058f, idProduct=6362
usb 2-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-6: Product: Mass Storage Device
usb 2-6: Manufacturer: Generic
usb 2-6: SerialNumber: 058F312D81B
sd 1:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB)
sd 1:0:0:0: Attached scsi generic sg1 type 0
scsi 2:0:0:0: CD-ROM            TSSTcorp CDDVDW SH-S203P  SB01 PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdb: sdb1 sdb2 sdb3 sdb4 <sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
 sdb5 >
Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
sr 2:0:0:0: Attached scsi generic sg2 type 5
sd 1:0:0:0: [sdb] Attached SCSI disk
Freeing unused kernel memory: 920k freed
usb 5-1: new low speed USB device using uhci_hcd and address 2
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 1688k freed
Freeing unused kernel memory: 1944k freed
dracut: dracut-005-5.fc13
dracut: rd_NO_LUKS: removing cryptoluks activation
dracut: rd_NO_LVM: removing LVM activation
udev: starting version 153
dracut: Starting plymouth daemon
usb 5-1: New USB device found, idVendor=04d9, idProduct=1400
usb 5-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
dracut: rd_NO_DM: removing DM RAID activation
input: HID 04d9:1400 as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.0/input/input2
generic-usb 0003:04D9:1400.0001: input,hidraw0: USB HID v1.10 Keyboard [HID 04d9:1400] on usb-0000:00:1a.2-1/input0
pata_marvell 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pata_marvell 0000:03:00.0: setting latency timer to 64
input: HID 04d9:1400 as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.1/input/input3
scsi6 : pata_marvell
scsi7 : pata_marvell
ata7: PATA max UDMA/100 cmd 0x1018 ctl 0x1024 bmdma 0x1000 irq 17
ata8: DUMMY
Initializing USB Mass Storage driver...
scsi8 : usb-storage 2-6:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
generic-usb 0003:04D9:1400.0002: input,hidraw1: USB HID v1.10 Mouse [HID 04d9:1400] on usb-0000:00:1a.2-1/input1
firewire_ohci 0000:07:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
firewire_ohci: Added fw-ohci device 0000:07:03.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2
usb 3-2: new full speed USB device using uhci_hcd and address 2
dracut: Autoassembling MD Raid
md: md0 stopped.
md: bind<sdb1>
md: bind<sda1>
md: raid1 personality registered for level 1
raid1: raid set md0 active with 2 out of 2 mirrors
md0: detected capacity change from 0 to 106823680
dracut: mdadm: /dev/md0 has been started with 2 drives.
 md0: unknown partition table
md: md1 stopped.
md: bind<sdb3>
md: bind<sda3>
raid1: raid set md1 active with 2 out of 2 mirrors
md1: detected capacity change from 0 to 16392912896
dracut: mdadm: /dev/md1 has been started with 2 drives.
 md1: unknown partition table
usb 3-2: New USB device found, idVendor=046d, idProduct=08b2
usb 3-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
md: md2 stopped.
md: bind<sdb5>
md: bind<sda5>
raid1: raid set md2 active with 2 out of 2 mirrors
md2: detected capacity change from 0 to 222296276992
dracut: mdadm: /dev/md2 has been started with 2 drives.
 md2: unknown partition table
firewire_core: created device fw0: GUID 009027000033420f, S400
dracut: Autoassembling MD Raid
scsi 8:0:0:0: Direct-Access     Generic  USB SD Reader    1.00 PQ: 0 ANSI: 0
scsi 8:0:0:1: Direct-Access     Generic  USB CF Reader    1.01 PQ: 0 ANSI: 0
scsi 8:0:0:2: Direct-Access     Generic  USB SM Reader    1.02 PQ: 0 ANSI: 0
scsi 8:0:0:3: Direct-Access     Generic  USB MS Reader    1.03 PQ: 0 ANSI: 0
sd 8:0:0:0: Attached scsi generic sg3 type 0
sd 8:0:0:1: Attached scsi generic sg4 type 0
sd 8:0:0:2: Attached scsi generic sg5 type 0
sd 8:0:0:0: [sdc] Attached SCSI removable disk
sd 8:0:0:3: Attached scsi generic sg6 type 0
sd 8:0:0:1: [sdd] Attached SCSI removable disk
sd 8:0:0:3: [sdf] Attached SCSI removable disk
sd 8:0:0:2: [sde] Attached SCSI removable disk
EXT4-fs (md1): mounted filesystem with ordered data mode
dracut: Mounted root filesystem /dev/md1
dracut: Loading SELinux policy
SELinux:  Disabled at runtime.
SELinux:  Unregistering netfilter hooks
type=1404 audit(1304087220.069:2): selinux=0 auid=4294967295 ses=4294967295
dracut: /sbin/load_policy: Can't load policy file /etc/selinux/targeted/policy/policy.15: No such file or directory
dracut: Switching root
readahead: starting
udev: starting version 153
microcode: CPU0 sig=0x1067a, pf=0x10, revision=0x0
microcode: CPU1 sig=0x1067a, pf=0x10, revision=0x0
microcode: CPU2 sig=0x1067a, pf=0x10, revision=0x0
microcode: CPU3 sig=0x1067a, pf=0x10, revision=0x0
microcode: Microcode Update Driver: v2.00 <tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba
Linux video capture interface: v2.00
microcode: CPU0 updated to revision 0xa07, date = 2008-04-09
microcode: CPU1 updated to revision 0xa07, date = 2008-04-09
microcode: CPU2 updated to revision 0xa07, date = 2008-04-09
microcode: CPU3 updated to revision 0xa07, date = 2008-04-09
pwc: Philips webcam module version 10.0.13 loaded.
pwc: Supports Philips PCA645/646, PCVC675/680/690, PCVC720[40]/730/740/750 & PCVC830/840.
pwc: Also supports the Askey VC010, various Logitech Quickcams, Samsung MPC-C10 and MPC-C30,
pwc: the Creative WebCam 5 & Pro Ex, SOTEC Afina Eye and Visionite VCS-UC300 and VCS-UM100.
pwc: Logitech QuickCam 4000 Pro USB webcam detected.
pwc: Registered as video0.
input: PWC snapshot button as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/input/input4
usbcore: registered new interface driver Philips webcam
e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
e1000e: Copyright (c) 1999 - 2009 Intel Corporation.
e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
e1000e 0000:00:19.0: setting latency timer to 64
  alloc irq_desc for 31 on node -1
  alloc kstat_irqs on node -1
e1000e 0000:00:19.0: irq 31 for MSI/MSI-X
0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:1c:c0:29:b5:09
0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
0000:00:19.0: eth0: MAC: 7, PHY: 6, PBA No: ffffff-0ff
i801_smbus 0000:00:1f.3: PCI INT B -> GSI 18 (level, low) -> IRQ 18
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
iTCO_wdt: Found a ICH9R TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
  alloc irq_desc for 22 on node -1
  alloc kstat_irqs on node -1
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
  alloc irq_desc for 32 on node -1
  alloc kstat_irqs on node -1
HDA Intel 0000:00:1b.0: irq 32 for MSI/MSI-X
HDA Intel 0000:00:1b.0: setting latency timer to 64
ALSA sound/pci/hda/hda_codec.c:4385: autoconfig: line_outs=3 (0xd/0xf/0x10/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:4389:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:4393:    hp_outs=1 (0xa/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:4394:    mono: mono_out=0x0
ALSA sound/pci/hda/hda_codec.c:4397:    dig-out=0x21/0x0
ALSA sound/pci/hda/hda_codec.c:4405:    inputs: mic=0xe, fmic=0xb, line=0xc, fline=0x0, cd=0x0, aux=0x0
ALSA sound/pci/hda/patch_sigmatel.c:3014: stac92xx: dac_nids=3 (0x2/0x5/0x4/0x0/0x0)
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
input: HDA Intel Line In at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
input: HDA Intel Mic at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
input: HDA Intel Mic at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel Speaker at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel Speaker at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel Speaker at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
usbcore: registered new interface driver snd-usb-audio
nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
nvidia 0000:01:00.0: setting latency timer to 64
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
NVRM: loading NVIDIA UNIX x86_64 Kernel Module  260.19.36  Tue Jan 18 16:56:11 PST 2011
kjournald starting.  Commit interval 5 seconds
EXT3-fs (md0): using internal journal
EXT3-fs (md0): mounted filesystem with ordered data mode
kjournald starting.  Commit interval 5 seconds
EXT3-fs (md2): using internal journal
EXT3-fs (md2): mounted filesystem with ordered data mode
Adding 2040248k swap on /dev/sda2.  Priority:-1 extents:1 across:2040248k
Adding 2040248k swap on /dev/sdb2.  Priority:-2 extents:1 across:2040248k
p4-clockmod: Unknown CPU. Please send an e-mail to <cpufreq@xxxxxxxxxxxxxxx>
p4-clockmod: Unknown CPU. Please send an e-mail to <cpufreq@xxxxxxxxxxxxxxx>
p4-clockmod: Unknown CPU. Please send an e-mail to <cpufreq@xxxxxxxxxxxxxxx>
p4-clockmod: Unknown CPU. Please send an e-mail to <cpufreq@xxxxxxxxxxxxxxx>
e1000e 0000:00:19.0: irq 31 for MSI/MSI-X
e1000e 0000:00:19.0: irq 31 for MSI/MSI-X
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
0000:00:19.0: eth0: 10/100 speed: disabling TSO
Bridge firewalling registered
virbr0: starting userspace STP failed, starting kernel STP
Ebtables v2.0 registered
ip6_tables: (C) 2000-2006 Netfilter Core Team
fuse init (API version 7.13)

[Index of Archives]     [Linux Kernel Devel]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite Forum]     [Linux SCSI]

  Powered by Linux